1. you edit lilo.conf as root, from terminal or graficaly, from Konqueror (my prefer way)
2. you must save what you did
3. now, you must perform command LILO from terminal, you will see masage if all is good.
After that, your new lilo will work.
The best way to answer my many questions is by asking "Is it possible to boot the Knoppix 3.8.1 LiveCD and perform a Linux install such that a reboot is not required?" This can be refined by adding "After a 'knoppix-installer' session of installing to /dev/hda1, can I transfer control to the computer (/dev/hda1) so that everything will run from the Hard Disk and not the CD?" The CD is the speed bottleneck of a LiveCD system.
After installing Knoppix 3.8.1 via the 'knoppix-installer' script, I needed to modify /etc/lilo.conf to add "acpi=off" to the boot string.
Not knowing how to edit hda1:/etc/lilo.conf, I simply rebooted. As is noted elsewhere on this forum, my PS2 mouse was not installed since "acpi=off" had not been added to the lilo.conf boot string. The Knoppix CD creates a virtual filesystem. Where is the partition (hda1) to which it installed the new system?
How can I edit the file hda1:/etc/lilo.conf and not a virtual copy? I need to edit the actual file on hda1 so that when I reboot, 'acpi=off' is read from the new file at hda1:/etc/lilo.conf.
Thanks, Bob
1. you edit lilo.conf as root, from terminal or graficaly, from Konqueror (my prefer way)
2. you must save what you did
3. now, you must perform command LILO from terminal, you will see masage if all is good.
After that, your new lilo will work.
1U Supermicro Server 10 Bay 2x Intel Xeon 3.3Ghz 8C 128GB RAM 480GB SSD 2x 10GBE
$297.00
HP ProLiant Xeon E3-1220L V2 MicroServer Gen8 2.30 GHz 16 GB RAM NO DRIVES
$199.99
HPE ProLiant MicroServer Gen8 Intel Xeon E3-1265L 16GB ECC PCIe x16 4x1TB HDD
$249.99
HPE ProLiant MicroServer Gen10 Plus v2 Ultra Micro Tower Server - 1 x Intel Xeon
$846.19
SuperMicro Server 505-2 Intel Atom 2.4GHz 8GB RAM SYS-5018A-FTN4 1U Rackmount
$202.49
HP ProLiant HSTNS-5151 Micro Server 8GB RAM No Drives/Key/Caddies *READ*
$94.99
Supermicro 5018A-FTN4 Rack Server - Black
$125.00
Microsel Server Tower Supermicro X10SAE E3-1275 V3 @3.5GHz 16GB 509849-001
$149.99
SUPERMICRO CSE-512 AMD Opteron Processor 6128, 32GB DDR3 RAM NO HDD
$90.00
1U Supermicro Server X10DRU-i+ 2x Xeon E5-2690 V4 28 Cores 64GB 4x 10GBE-T 2PS
$324.00