1. you edit lilo.conf as root, from terminal or graficaly, from Konqueror (my prefer way)
2. you must save what you did
3. now, you must perform command LILO from terminal, you will see masage if all is good.
After that, your new lilo will work.
The best way to answer my many questions is by asking "Is it possible to boot the Knoppix 3.8.1 LiveCD and perform a Linux install such that a reboot is not required?" This can be refined by adding "After a 'knoppix-installer' session of installing to /dev/hda1, can I transfer control to the computer (/dev/hda1) so that everything will run from the Hard Disk and not the CD?" The CD is the speed bottleneck of a LiveCD system.
After installing Knoppix 3.8.1 via the 'knoppix-installer' script, I needed to modify /etc/lilo.conf to add "acpi=off" to the boot string.
Not knowing how to edit hda1:/etc/lilo.conf, I simply rebooted. As is noted elsewhere on this forum, my PS2 mouse was not installed since "acpi=off" had not been added to the lilo.conf boot string. The Knoppix CD creates a virtual filesystem. Where is the partition (hda1) to which it installed the new system?
How can I edit the file hda1:/etc/lilo.conf and not a virtual copy? I need to edit the actual file on hda1 so that when I reboot, 'acpi=off' is read from the new file at hda1:/etc/lilo.conf.
Thanks, Bob
1. you edit lilo.conf as root, from terminal or graficaly, from Konqueror (my prefer way)
2. you must save what you did
3. now, you must perform command LILO from terminal, you will see masage if all is good.
After that, your new lilo will work.
Cisco Meraki MA-SFP-1GB-SX 1000BASE-SX SFP Transceiver Module
$24.99
Cisco GLC-FE-100FX-RGD 100BASE-FX SFP Transceiver Module
$17.99
Cisco GLC-GE-100FX 100BASE-FX SGMII SFP Transceiver Module
$83.99
Cisco SFP-10/25G-CSR-S 10/25GBASE-CSR SFP28, 850nm, 100m, LC,
$54.00
Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module 10-2415-03
$8.00
SFP-10G-SR Original Cisco 10GBASE-SR SFP+ V02 Multi mode Transceiver 10-2415-02
$5.00
10Gtek ASF-10G-T 10GBase-T 10GbE SFP+ to RJ-45 Copper Optical Transceiver Module
$35.99
Brand New Cisco GLC-LH-SMD 1000BASE-LX/LH SFP Module 1310nm 10km SMF LC
$13.89
LOT OF 20 Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module
$89.00
10 PCS Cisco GLC-LH-SMD 10-2625-01 1310nm SFP Transceiver Module
$85.00