from a live-cd install, and a command prompt screen
it's
sudo knoppix-installer
or run from a super user command prompt screen
everything is in read-only mode in live-CD mode
root@1[knoppix]# knoppix-installer
swapon: /dev/hdb2: Device or resource busy
/usr/bin/mkdesktophdicons: line 42: cannot create temp file for here document: Permission denied
/usr/bin/mkdesktophdicons: line 100: cannot create temp file for here document: Permission denied
/usr/bin/mkdesktophdicons: line 100: cannot create temp file for here document: Permission denied
/usr/bin/mkdesktophdicons: line 100: cannot create temp file for here document: Permission denied
/usr/bin/mkdesktophdicons: line 100: cannot create temp file for here document: Permission denied
Can't open /mnt/hdinstall/home/cryptos/.mozilla/default/*/prefs.js: No such file or directory.
/usr/sbin/alsactl: save_state:1194: No soundcards found...
/proc/misc: No entry for device-mapper found
Is device-mapper driver missing from kernel?
/dev/mapper/control: open failed: No such device
Failure to communicate with kernel device-mapper driver.
/proc/misc: No entry for device-mapper found
Is device-mapper driver missing from kernel?
/dev/mapper/control: open failed: No such device
Failure to communicate with kernel device-mapper driver.
Incompatible libdevmapper 1.00.20-ioctl (2005-01-06)(compat) and kernel driver
Warning: '/proc/partitions' does not match '/dev' directory structure.
Name change: '/dev/cloop0' -> '/dev/cloop'
Warning: Partition 1 on /dev/hdb is not marked Active.
Warning: Unable to determine video adapter in use in the present system.
Warning: CHANGE AUTOMATIC assumed after "other=/dev/hdd1"
Warning: CHANGE AUTOMATIC assumed after "other=/dev/hdd2"
Device 0x1640: Inconsistent partition table, 2nd entry
CHS address in PT: 1020:0:1 --> LBA (1028160)
LBA address in PT: 16386300 --> CHS (16256:4:1)
Fatal: Either FIX-TABLE or IGNORE-TABLE must be specified
If not sure, first try IGNORE-TABLE (-P ignore)
What to do?
from a live-cd install, and a command prompt screen
it's
sudo knoppix-installer
or run from a super user command prompt screen
everything is in read-only mode in live-CD mode
i am root when ronnig knoppix-installer
perhaps, the hdd is on the wrong controller or set as slave instead of master ....
hdb2 /
is it what you wanted ?
usually it goes to hda1, might be hard coded in the knoppix-installer script files.
where is your hdd physically connected and should it be ?
other ide devices ?
lspci or what's the command to show the ide list of devices attached ?
I want to install on hdb1.
hdb2 is swap
hdb3 is NTFS
I have two HDDs - hdb and hdd, and 2 CD-ROM - hda and hdc
very odd you want to do it the hard way.
change the master slave switches on the hdds and cds so the hdb is hda
the install script is written perhaps not too smartly.
it is trying to install to your hda drive.
Maybe: but I suspect some kind of cabling/jumpering error (or even the dreaded cable select)the install script is written perhaps not too smartly.
it is trying to install to your hda drive.
WTH, you'll have to open the box up anyway. Why not just put the drive you want to install Knoppix to as the primary master, install to it, write lilo (or grob) to a floppy for the time being, reset the drives to the original order and run lilo again.
If there is a cabling/jumpering error or if it trays to install on my cd-rm then why it copies file without any errors. The Thing above is happening when all the files are copied and the system is converted to multy-user.
However my motherboard is old and when i connect my brand new 80GB HDD as a master my old drive dose not work at all!?!?!?!?! so i heve to put my CD-R and CD-RW as masters.
Sorry for my poor English! I hope you can understand me.
the knoppix-install script is written to install to
/dev/hda3 and
/dev/hda2
now, if your HDD is on hdb, ........
Intel XEON E5-2699 V3 CPU PROCESSOR 18 CORE 2.30GHZ 45MB L3 CACHE 145W SR1XD
$45.00
Intel - Core i9-12900K Desktop Processor 16 (8P+8E) Cores up to 5.2 GHz Unloc...
$619.99
Intel - Core i7-12700K Desktop Processor 12 (8P+4E) Cores up to 5.0 GHz Unloc...
$419.99
Intel Xeon E5-2697A V4 2.6GHz CPU Processor 16-Core Socket LGA2011 SR2K1
$39.99
Intel - Core i9-14900K 14th Gen 24-Core 32-Thread - 4.4GHz (6.0GHz Turbo) Soc...
$619.99
AMD Ryzen 7 7800X3D Processor (5 GHz, 8 Cores, Socket AM5) Boxed -...
$340.00
Intel - Core i7-14700K 14th Gen 20-Core 28-Thread - 4.3GHz (5.6GHz Turbo) Soc...
$444.99
Intel Core i7-4790 3.6 GHz Quad-Core LGA1150 SR1QF CPU Processor
$33.99
Intel Xeon Gold 6238 2.1GHz 30.25MB 22-Core LGA 3647 CPU / Processor ___ SRFPL
$379.99
Intel Core i7-7700 3.60GHz Quad-Core CPU
$41.28