Page 1 of 2 12 LastLast
Results 1 to 10 of 12

Thread: NOT SUPPORTED NETWORK CARDS FOUND - Knoppix 3.8.1

  1. #1
    Junior Member registered user
    Join Date
    May 2005
    Location
    Venezuela
    Posts
    25

    NOT SUPPORTED NETWORK CARDS FOUND - Knoppix 3.8.1

    Hi..., I'm a new knoppix user, and I has been working with Kn 3.4, but I created a boot CD with the version 3.8.1 with yhe K3b software y works fine, my problem is that I can conect to internet, the message that show at subject is the message that knoppix send me when I want to configure my ethernet card in Knoppix menu

    WHAT CAN I DO ?

  2. #2
    Junior Member registered user
    Join Date
    May 2005
    Location
    Venezuela
    Posts
    25

    Re: NOT SUPPORTED NETWORK CARDS FOUND - Knoppix 3.8.1

    Quote Originally Posted by gonzalezmfrank
    Hi..., I'm a new knoppix user, and I has been working with Kn 3.4, but I created a boot CD with the version 3.8.1 with yhe K3b software y works fine, my problem is that I can conect to internet, the message that show at subject is the message that knoppix send me when I want to configure my ethernet card in Knoppix menu

    WHAT CAN I DO ?
    Mi ethernet card is : intel 855x-based ethernet PCI (10/100)
    IRQ = 22

  3. #3
    Senior Member
    Join Date
    Nov 2003
    Posts
    1,323
    Paste in here the part about your Ethernet controller from the command lspci -v

    Also have you ran netcardconfig? Should also be under the Knoppix menu item.

  4. #4
    Junior Member registered user
    Join Date
    May 2005
    Location
    Venezuela
    Posts
    25

    NOT SUPPORTED NETWORK CARD FOUND - Knoppix 3.8.1

    0000:00:00.0 Host bridge: Intel Corp. 82865G/PE/P DRAM Controller/Host-Hub Interface (rev 02)
    Subsystem: Intel Corp. 82865G/PE/P DRAM Controller/Host-Hub Interface
    Flags: bus master, fast devsel, latency 0
    Memory at f8000000 (32-bit, prefetchable) [size=64M]
    Capabilities: [e4] #09 [0106]
    Capabilities: [a0] AGP version 3.0

    0000:00:01.0 PCI bridge: Intel Corp. 82865G/PE/P PCI to AGP Controller (rev 02) (prog-if 00 [Normal decode])
    Flags: bus master, 66MHz, fast devsel, latency 32
    Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
    Memory behind bridge: fc000000-fdffffff
    Prefetchable memory behind bridge: f0000000-f7ffffff

    0000:00:1d.0 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #1 (rev 02) (prog-if 00 [UHCI])
    Subsystem: Intel Corp.: Unknown device 4c43
    Flags: bus master, medium devsel, latency 0, IRQ 16
    I/O ports at cc00 [size=32]

    0000:00:1d.1 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #2 (rev 02) (prog-if 00 [UHCI])
    Subsystem: Intel Corp.: Unknown device 4c43
    Flags: bus master, medium devsel, latency 0, IRQ 19
    I/O ports at d000 [size=32]

    0000:00:1d.2 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #3 (rev 02) (prog-if 00 [UHCI])
    Subsystem: Intel Corp.: Unknown device 4c43
    Flags: bus master, medium devsel, latency 0, IRQ 18
    I/O ports at d400 [size=32]

    0000:00:1d.3 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #4 (rev 02) (prog-if 00 [UHCI])
    Subsystem: Intel Corp.: Unknown device 4c43
    Flags: bus master, medium devsel, latency 0, IRQ 16
    I/O ports at d800 [size=32]

    0000:00:1d.7 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller (rev 02) (prog-if 20 [EHCI])
    Subsystem: Intel Corp.: Unknown device 4c43
    Flags: bus master, medium devsel, latency 0, IRQ 23
    Memory at fe300000 (32-bit, non-prefetchable) [size=1K]
    Capabilities: [50] Power Management version 2
    Capabilities: [58] #0a [20a0]

    0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev c2) (prog-if 00 [Normal decode])
    Flags: bus master, fast devsel, latency 0
    Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
    I/O behind bridge: 0000b000-0000bfff
    Memory behind bridge: fe000000-fe2fffff

    0000:00:1f.0 ISA bridge: Intel Corp. 82801EB/ER (ICH5/ICH5R) LPC Bridge (rev 02)
    Flags: bus master, medium devsel, latency 0

    0000:00:1f.1 IDE interface: Intel Corp. 82801EB/ER (ICH5/ICH5R) Ultra ATA 100 Storage Controller (rev 02) (prog-if 8a [Master SecP PriP])
    Subsystem: Intel Corp.: Unknown device 4c43
    Flags: bus master, medium devsel, latency 0, IRQ 18
    I/O ports at <unassigned>
    I/O ports at <unassigned>
    I/O ports at <unassigned>
    I/O ports at <unassigned>
    I/O ports at ffa0 [size=16]
    Memory at 20000000 (32-bit, non-prefetchable) [size=1K]

    0000:00:1f.2 IDE interface: Intel Corp. 82801EB (ICH5) Serial ATA 150 Storage Controller (rev 02) (prog-if 8f [Master SecP SecO PriP PriO])
    Subsystem: Intel Corp.: Unknown device 4c43
    Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 18
    I/O ports at ec00 [size=8]
    I/O ports at e800 [size=4]
    I/O ports at e400 [size=8]
    I/O ports at e000 [size=4]
    I/O ports at dc00 [size=16]

    0000:00:1f.3 SMBus: Intel Corp. 82801EB/ER (ICH5/ICH5R) SMBus Controller (rev 02)
    Subsystem: Intel Corp.: Unknown device 4c43
    Flags: medium devsel, IRQ 3
    I/O ports at c800 [size=32]

    0000:00:1f.5 Multimedia audio controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) AC'97 Audio Controller (rev 02)
    Subsystem: Intel Corp.: Unknown device e002
    Flags: bus master, medium devsel, latency 0, IRQ 17
    Memory at fe300400 (32-bit, non-prefetchable) [size=512]
    Memory at fe300800 (32-bit, non-prefetchable) [size=256]
    Capabilities: [50] Power Management version 2

    0000:01:00.0 VGA compatible controller: nVidia Corporation NV11 [GeForce2 MX/MX 400] (rev b2) (prog-if 00 [VGA])
    Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 11
    Memory at fc000000 (32-bit, non-prefetchable) [size=16M]
    Memory at f0000000 (32-bit, prefetchable) [size=128M]
    Expansion ROM at fd000000 [disabled] [size=64K]
    Capabilities: [60] Power Management version 2
    Capabilities: [44] AGP version 2.0

    0000:02:01.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] (rev 0
    Subsystem: Unknown device 0009:000c
    Flags: medium devsel, IRQ 22
    Memory at fe200000 (32-bit, non-prefetchable) [size=4K]
    I/O ports at bc00 [size=64]
    Memory at fe000000 (32-bit, non-prefetchable) [size=1M]
    Expansion ROM at fe100000 [disabled] [size=1M]
    Capabilities: [dc] Power Management version 2

    0000:02:02.0 Multimedia audio controller: Ensoniq ES1370 [AudioPCI] (rev 01)
    Subsystem: Unknown device 4942:4c4c
    Flags: bus master, slow devsel, latency 32, IRQ 17
    I/O ports at b800 [size=64]

    Here the result of lspci -v

    I ran the program that you said but the message is as the subject

    thanks...... frank

  5. #5
    Senior Member
    Join Date
    Nov 2003
    Posts
    1,323
    Does the command lsmod list a e100 or eepro100 module. If not, try first sudo modprobe eepro100 and if netcardconfig still doesn't work, try with e100.

  6. #6
    Junior Member registered user
    Join Date
    May 2005
    Location
    Venezuela
    Posts
    25

    NOT SUPPORTED NETCARD CARDS FOUND - knoppix 3.8.1

    thanks a lot.... it works.....it persistent ?...... if the answer is no.... how can i do that module persistent in my configuration... the another quiestion is....I saw that in 3.8.1 root is disable to startup, how can i make rot enable for root

  7. #7
    Senior Member
    Join Date
    Nov 2003
    Posts
    1,323
    I need help from someone who actually runs knoppix on the hd. Does knoppix use /etc/modules-$(uname -r) or modules.conf or modutils or what?
    You add it to the file that loads the modules and run update-modules. I just don't know what file(s) knoppix uses for it.
    You can also try adding it with sudo modconf

    Do you mean root login to KDE? You should NOT login as root to KDE, instead use su, sux or kdesu.

  8. #8
    Junior Member registered user
    Join Date
    May 2005
    Location
    Venezuela
    Posts
    25

    NOT SUPPORTED NETWORK CARDS FOUND - Knoppix 3.8.1

    Markus.

    I know you said, in Knoppix 3.4 (my installed old version ), permits me to login like root and with a diferent user, in that version of knoppix I had to execute "netcardconfig" to start eth0, this is my actual problem. In Knoppix 3.8 the situation is the same, and I really don't like to do it each time

    Thanks a lot..... Frank

  9. #9
    Senior Member
    Join Date
    Nov 2003
    Posts
    1,323
    Hmm, not sure if I'm the right person to answer this since I've never had any networking problems with knoppix/kanotix.
    When you boot up now, is the NIC recognised?
    What does ifconfig say before running netcardconfig?
    Does "ifup eth0" help? If not, do "pump -i eth0" after and check the network.
    If ifup and pump make it work, you might as well put those lines at the end of /etc/init.d/bootmisc.sh

    About logging in as root, you have to open a console anyway to run netcardconfig, so why not su first and then run it, or use "sudo netcardconfig"

  10. #10
    Junior Member registered user
    Join Date
    May 2005
    Location
    Venezuela
    Posts
    25

    NOT SUPPORTED NETWORK CARDS FOUND - Knoppix 3.8.1

    I don't like to manage the bootmisc.sh..... is too deep to me.

    But if I run "modconf" and select eepro100, for my netcard...... it configure all the next sessions ? or i have to execute "modconf" each session ?

    If I run "update-modules", It make the change permanent ?

    I can believe that exist a way to recognize and up the card without the comands by user..... but how i said at the begining ... i am a new user

Page 1 of 2 12 LastLast

Similar Threads

  1. No Supported Network Card Found, it worked before!!
    By gauti.exe in forum Networking
    Replies: 1
    Last Post: 12-27-2006, 09:52 AM
  2. Replies: 4
    Last Post: 06-15-2005, 03:21 AM
  3. "No supported Network Card Found"
    By rayesteq in forum Networking
    Replies: 0
    Last Post: 09-14-2004, 04:47 PM
  4. What WiFi cards are supported by Knoppix STD 3.2
    By MattNooB in forum Networking
    Replies: 0
    Last Post: 01-10-2004, 12:26 AM
  5. "No supported Network Cards Found"
    By Angryguy in forum Networking
    Replies: 4
    Last Post: 09-12-2003, 01:48 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •