-
Slow modem/dial-up - FIX
I am running a HD install of Knoppix 3.7 as a dual boot with Windows XP on my desktop.
The modem is an external US Robotics 56K Faxmodem.
Running under Windows it works OK, but under Knoppix it is very slow. The RD light remains steady and the SD flashes mostly every second. Konqueror shows the speed as around 700 B/s.
I have tried amending the MTU and MRU and get best results with MRU down at 296 and MTU 576.
There is an ethernet card on my PC, so I have tried but that has not made any difference either.
Any suggestions please? Appreciate step by step instructions - Linux noob!
Peter
Similar Threads
-
By mipr in forum Hardware & Booting
Replies: 4
Last Post: 09-01-2008, 01:46 AM
-
By PrincessMisery in forum Networking
Replies: 3
Last Post: 03-08-2007, 09:49 AM
-
By panthrax in forum Hardware & Booting
Replies: 2
Last Post: 12-11-2003, 11:39 PM
-
By VeeDubb in forum The Lounge
Replies: 6
Last Post: 06-03-2003, 02:41 AM
-
By FarAway in forum Networking
Replies: 2
Last Post: 05-14-2003, 10:29 PM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
HPE BL460c G9 ProLiant Blade | 2x Xeon E5-2620V3 | NO RAM | P244BR | 2xHDD Tray
$179.00
DELL PEM640 POWEREDGE M640 BLADE SERVER
$539.95
HP ProLiant BL460c G9 (Gen9) 2x E5-2670V3 12 Core 3.1GHz No Ram or No Drives
$59.98
Dell PowerEdge M620 0F9HJC Blade Server 2*E5-2670 2.60GHz 192GB RAM 2*300GB SAS
$103.99
2 x HP ProLiant BL460c (447707-B21) Blade Servers No RAM No HDD
$30.00
DELL M630 BLADE SERVER x2 XEON E5-2660V3 @ 2.6GH H730 PERC HDD CADDIES 16GB FC
$50.00
Dell PowerEdge M640 Blade Server
$539.95
Cisco UCS B200 M4 Blade Server, 2x2660 V3, 40GbE, No Ram No HDD
$35.95
Dell PowerEdge M620 Blade Server
$39.99
HP ProLiant BL460c Gen9 Blade 2x E5-2660v3 2.6GHz =20 Cores 64GB P246 650FLB
$196.00