-
video card
greetings from Brazil...
i have a problem with the video card detection..
i have an onboard card sis530 that is not used, and a nvidia tnt2 board that a usually use.....
but in the video card detection, the knoppix detects the onboard non-used card, and it occurs an error in the x-windows start, what should i do?
thanks
Jason
-
Senior Member
registered user
<snip>
i have a problem with the video card detection...
</snip>
I am assuming that the TNT card is PCI-based. If so, go into the BIOS; there should be an option to boot into AGP or PCI video, usually under the "Integrated Chipset" options page. It is probably set to boot into (sometimes it says "from") AGP. Set this to PCI. If the option change does not work, try to find a new BIOS for your board.
Alhough this is slightly off-topic, it is still worthy of mention: DON'T upgrade the BIOS from a physical device, that is, a floppy or hard drive. I use the MSI technique:
1. Boot from a Win98 Emergency Boot Disk (either version). You don't need CD support. This creates a RAMdisk in memory.
2. Copy the flashing utility and the BIOS image (usually with a .BIN or .ROM extension) to the RAMdisk.
3. CD to the RAMdisk and run the flash process from there.
In a sense, flashing the BIOS "pulls the rug from under" the hardware, plus the floppy is slow and error-prone. I have had the best results using the above technique.
Similar Threads
-
By Stas in forum General Support
Replies: 9
Last Post: 10-13-2004, 03:18 PM
-
By Jesse in forum General Support
Replies: 1
Last Post: 05-23-2004, 12:37 AM
-
By rhpot1991 in forum General Support
Replies: 0
Last Post: 02-16-2004, 12:21 AM
-
By nomex in forum Hardware & Booting
Replies: 5
Last Post: 07-05-2003, 06:02 PM
-
By soapee01 in forum Hardware & Booting
Replies: 13
Last Post: 04-21-2003, 10:47 AM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bare S100 CPU Replacement for ALTAIR 8800 IMSAI 8080 JAIR Single Board Computer
$42.00
MITS ALTAIR 8800 Original Vintage Microcomputer
$6000.00
S-100 backplane motherboard bare PCB 9 slot (for Altair/IMSAI)
$30.00
Altair MITS 8800 CPU Parts Kit not IMSAI 8080 S100 (board NOT included)
$64.95
MITS ALTAIR 8800 Original Vintage Microcomputer S-100 Buy It Now $5999
$5999.00
MITS ALTAIR 8800 Original Vintage Microcomputer with 14 boards - Buy It Now
$9500.00
Altair Model 202
$22.50
Vintage Rare S100 Card Bundle - Includes CPU / processor / Interface / Port Card
$395.00
VINTAGE DEC 1975 VOL 1 ISSUE 1 SCCS INTERFACE MAGAZINE MITS ALTAIR COVER & ADS
$359.99
Vintage Altair 8088 CPU Wire Wrapped S100 Card w Mon EPROM circuit board #T71
$99.00