no idea.
Wondering what wireless PCMCIA works best with knoppix's airsnort and kismet program. I've tried the orinoco silver and netgear ma401 but they don't seem to work. Any recommendation on what works from the cd-boot? thanks
no idea.
I couldn't get a Lucent (orinoco) to work either. Presumably, CISCO cards work well because they are the default in the kismet conf file and have a built-in hardware auto-channel-hopper, but I don't have one to try it and they are quite a bit more expensive than some of the others.
Proxim (was: Agere, was: Lucent) Orinoco Silver/Orinoco Gold. http://www.orinocowireless.com/produ...ard/index.html works immediately flawless
I can use the Orinoco card for communication, but not with kismet. It won't go into promisuous mode.
I just booted with a Netgear MA401 with the latest firmware update and everything worked wonderfully for me!
luxin - how did you get the MA401 to work in Kismet or even Airsnort? When I try to use airsnort it gives me an error on not being able to put it in monitor mode. I think it's using the orinoco drivers. Kismet just plain doesn't even load.
Or are you just talking about it working in general.
-
-
Go here to download the patch and read the command to put the card into monitor mode. Btw, it is monitor mode, not promiscuos mode.
http://airsnort.shmoo.com/orinocoinfo.html
from kismet wireless forum:
"Posted by: mrdquick
Subject: orinoco patch kernel ver 2.4.20
Date: 04:21:00 28/02/2003
> Hello all. I had previously used the orinoco patch, ver.09b-packet1, successfully on kernel ver 2.4.18. However, after upgrading to 2.4.20 and attempting to repatch I recieve errors on orinoco.c. I have also tried ver. 11b-patch, and received the same errors. Is there an updated patch to use?
>
> Thanks In Advance,
> itallushrt
I just install the latest pcmcia-cs package. Download the orinoco drivers provided by the orinoco website for linux. Untar the drivers in any directory. In the orinoco directory make a directory called wireless. Copy the entire contents of the orinoco directory you must untared to the wireless directory which you just created. copy the patch (pcmcia-cs-3.2.1-orinoco-patch.diff) to the orinoco directory (parent to wireless). in the orinoco directory run the patch like "patch -p0 < pcmcia-cs-3.2.1-orinoco-patch.diff"
it will patch the wireless drivers for the orinoco. run "make" in the wireless directory. then run make install. It will install the drivers over the kernel drivers or whichever is being used, go figure and restart your pcmcia card services "service pcmcia restart" It should work. do a iwpriv eth0 and it should show monitor at the bottom. Hope this helps "
You would have to remaster your knoppix version in order to get it working.
A-Tech 8GB DDR3 1600 PC3-12800 Laptop SODIMM 204-Pin Memory RAM PC3L DDR3L 1x 8G
$13.99
Samsung 16GB 2Rx4 PC4-2133P DDR4-17000 1.2V RDIMM ECC Registered Server Memory
$16.29
HyperX FURY DDR3 8GB 16GB 32GB 1600 MHz PC3-12800 Desktop RAM Memory DIMM 240pin
$12.90
A-Tech 8GB PC3-12800 Desktop DDR3 1600 MHz Non ECC 240-Pin DIMM Memory RAM 1x 8G
$13.99
8GB PC3L-12800S 1600MHz SODIMM DDR3 RAM | Grade A
$12.00
Kingston HyperX FURY DDR3 8GB 16GB 32G 1600 1866 1333 Desktop Memory RAM DIMM
$13.25
A-Tech 16GB 2 x 8GB PC3-12800 Laptop SODIMM DDR3 1600 Memory RAM PC3L 16G DDR3L
$27.98
32GB (4X8GB) DDR3 PC3-12800 1600 NON ECC LOW DENSITY MEMORY F3-12800CL10Q-32GBXL
$32.00
A-Tech 256GB 4x 64GB 4Rx4 PC4-19200 ECC Load Reduced LRDIMM Server Memory RAM
$287.96
Samsung 64GB 4DRx4 PC4-2400 LRDIMM DDR4-19200 ECC Load Reduced Server Memory RAM
$71.99