no idea.
Wondering what wireless PCMCIA works best with knoppix's airsnort and kismet program. I've tried the orinoco silver and netgear ma401 but they don't seem to work. Any recommendation on what works from the cd-boot? thanks
no idea.
I couldn't get a Lucent (orinoco) to work either. Presumably, CISCO cards work well because they are the default in the kismet conf file and have a built-in hardware auto-channel-hopper, but I don't have one to try it and they are quite a bit more expensive than some of the others.
Proxim (was: Agere, was: Lucent) Orinoco Silver/Orinoco Gold. http://www.orinocowireless.com/produ...ard/index.html works immediately flawless
I can use the Orinoco card for communication, but not with kismet. It won't go into promisuous mode.
I just booted with a Netgear MA401 with the latest firmware update and everything worked wonderfully for me!
luxin - how did you get the MA401 to work in Kismet or even Airsnort? When I try to use airsnort it gives me an error on not being able to put it in monitor mode. I think it's using the orinoco drivers. Kismet just plain doesn't even load.
Or are you just talking about it working in general.
-
-
Go here to download the patch and read the command to put the card into monitor mode. Btw, it is monitor mode, not promiscuos mode.
http://airsnort.shmoo.com/orinocoinfo.html
from kismet wireless forum:
"Posted by: mrdquick
Subject: orinoco patch kernel ver 2.4.20
Date: 04:21:00 28/02/2003
> Hello all. I had previously used the orinoco patch, ver.09b-packet1, successfully on kernel ver 2.4.18. However, after upgrading to 2.4.20 and attempting to repatch I recieve errors on orinoco.c. I have also tried ver. 11b-patch, and received the same errors. Is there an updated patch to use?
>
> Thanks In Advance,
> itallushrt
I just install the latest pcmcia-cs package. Download the orinoco drivers provided by the orinoco website for linux. Untar the drivers in any directory. In the orinoco directory make a directory called wireless. Copy the entire contents of the orinoco directory you must untared to the wireless directory which you just created. copy the patch (pcmcia-cs-3.2.1-orinoco-patch.diff) to the orinoco directory (parent to wireless). in the orinoco directory run the patch like "patch -p0 < pcmcia-cs-3.2.1-orinoco-patch.diff"
it will patch the wireless drivers for the orinoco. run "make" in the wireless directory. then run make install. It will install the drivers over the kernel drivers or whichever is being used, go figure and restart your pcmcia card services "service pcmcia restart" It should work. do a iwpriv eth0 and it should show monitor at the bottom. Hope this helps "
You would have to remaster your knoppix version in order to get it working.
Dell R730 w/ 2x E5-2650v3 10c, 192GB (12x16GB) RAM, H730 Mini, 2x 750W PSU
$349.99
Dell PowerEdge R720 Server - 2x8c CPU,256Gb RAM, 128Gb SSD/3x900Gb SAS, Proxmox
$340.00
$599.99
HP ProLiant DL380 Gen9 2U Server w/ 2x 2640v3, 16GB( 2x8GB) RAM, P440ar
$118.99
Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 128GB RAM No HDD
$389.99
Dell PowerEdge R620 Server 2x E5-2660 v1 2.2GHz 16 Cores 256GB RAM 2x 300GB HDD
$79.19
HP Proliant DL360 Gen9 28 Core SFF Server 2X E5-2680 V4 16GB RAM P440ar No HDD
$196.95
Dell PowerEdge R720XD Xeon E5-2680 V2 2.8GHz 20 Cores 256GB RAM 12x4TB
$510.00
DELL PowerEdge R730 Server 2x E5-2690v3 2.6GHz =24 Cores 32GB H730 4xRJ45
$274.00
1U Supermicro Server 10 Bay 2x Intel Xeon 3.3Ghz 8C 128GB RAM 480GB SSD 2x 10GBE
$297.00