two things...
Control center... see if there is anything under there.. make sure you as root, just incase... does that help??
Dear All,
I would like to discuss a feature, which is looking as a minor bug for me. This is work of autoconfiguration script knoppix-autoconfig, which change timezone on every boot depending on selected language. This is, indeed, very inconvinient and confusing for HDD installation. And, at the moment, could not be turned OFF except editing this script.
Recently I was helping one of my Dutch (timezone Europe/Amsterdam) friends who wanted language to be EN and was upset with timezone setting not saved between booting resulting with time being incorrect.
Possible solutions:
1) Modify knoppix-autoconfig to allow such autoconfigurations to be switched OFF and add a new option for booting.
2) Make a new script knoppix-hdd-autoconfig which would avoid doing a lot of staff which is constant for HDD installation (including changing fstab!).
3) Use Configuration save mode also for HDD installations so all customisations are re-applied every boot like for CDROM version.
Note: I'm a long time Debian user but spent too much time to fight against broken dependencies and missing modules, so migrated most of my installations from Debian Sarge to Knoppix 3.[7|8].
Pavel.
two things...
Control center... see if there is anything under there.. make sure you as root, just incase... does that help??
This is exactly my point: saved configuration got overwritten by one of startup scripts!
May be I should be installing in Debian mode not in Knoppix. But it is too late anyway (3 PC migrated).
One good news: in 3.9 this script changed in such way that 'tz' setting, when provided as kernel boot option,would overwrite the language default. But not for other ones (keyboard and etc).
So this posting is just for other people to know.
I can't say I have experienced a TZ issue as I am in the US and I use EN. I think that Debian mode is more stable than knoppix mode. I think Knoppix mode keeps the knoppix-autoconfig & knoppix-* scripts on the PC where as in the Debian mode, those scripts are not run.Originally Posted by pavel7nl
As for Debian sarge, I installed a plain sarge box from CD1. Then I installed KDE. I added a line to the sources.list & then installed KDE 3.4.1. Quite simple & gives me the benefits of Debian stable plus brand new KDE.
LSI 9207-8i 8-Port SAS Non-RAID 6GBPS PCIe Host Bus Adapter
$34.95
Oracle 7085209 LSI MegaRAID SAS 9361-8i 1GB Cache 12Gbps SAS/SATA PCIe RAID Card
$28.20
Cisco UCS LSI MegaRAID 9271CV-8I SAS2308 PCIe SAS Internal RAID Controller
$28.00
LSI 9223-8I 6GBPS PCIe SAS Internal RAID Controller
$22.75
Inspur LSI 9300-8i Raid Card 12Gbps HBA HDD Controller High Profile IT MODE
$15.98
LSI MegaRAID 9361-8i 12Gb PCIe 8-Port SAS/SATA RAID 1Gb w/BBU/CacheVault/License
$39.95
LSI MegaRAID 9361-8i 12Gbps PCIe 3 x8 SATA SAS 3 8 Port RAID + BBU & CacheVault
$39.00
ORICO Multi Bay RAID Hard Drive Enclosure USB 3.0/ Type-C For 2.5/3.5'' HDD SSDs
$82.49
ACASIS 2.5/3.5 inch 2 Bay SATA USB 3.0 Hard Drive Disk HDD SSD Enclosure 4 RAID
$58.99
Dell PERC H330 PCIe 3.0 x8 RAID Storage Controller 04Y5H1 High Profile
$17.99