-
Durring install boot, system reboots after decompressing int
All,
I am trying to boot knopixx on my system, and I can't seem to get past a certain point. When booting the system I will get to the initial screen asking for boot options. I will press enter, linux kernel will decompress, initrd.img will decompress, the system will say "ready", the screen will clear, and my system will reboot.
I have tried every combination of acpi=off, noacpi, nolacpi with expert or linux. I have also tried adding falesafe and the no frame buffer option. All result in the exact same reboot. The really odd thing is I get the exact same problem with Ubuntu also, so I am sure it isn't just Knoppix. I would be welcome to any suggestions, here are my system specs:
MSI K7N2 Delta-L MB (Nforce 2 Chipset) (Latest Bios revision)
AMD Athlon XP 2400+ (no overclock)
512MB DDR Ram (at 333mhz)
Geforce FX 5700 Ultra
Audigy Plat.
Emu 1212M
350W Power Supply
8X DVD+- RW
60 GB ATA WD 5700rpm HDD
TIA
Maarek
-
Same Problem Here
I am having nearly the same problem, except my system doesn't reboot.
I get this with any of the lilo options:
boot: linux or knoppix or debug or expert or failsafe
Loading Linux............................
Loading minirt.gz...........................
Ready.
I just getting a blinking cursor after this point. I have tried some debian rescue CDs that will reboot my system instead of the blinky cursor.
I am running KNOPPIX_V3.9-2005-05-27-EN
My system is:
Dell Poweredge 2200
Dual Pentium II 300 Mhz
512 Megs Ram
Mylex Acceleraid 160 Raid Controller
3x 9 Gig 10k SCSI HDs
-
Re: Durring install boot, system reboots after decompressing
I have same problem.
But only if I overclock cpu, if I have normal frequency it boots ok.
There is no problem with booting Gentoo or XP when overclocked.
Similar Threads
-
By willmafingerdo in forum General Support
Replies: 1
Last Post: 08-16-2008, 07:33 AM
-
By mimes in forum Hdd Install / Debian / Apt
Replies: 2
Last Post: 11-21-2004, 03:44 AM
-
By istvan43 in forum General Support
Replies: 0
Last Post: 03-06-2004, 07:32 PM
-
By koootzz in forum General Support
Replies: 0
Last Post: 02-19-2004, 06:47 PM
-
By audioaficionado in forum Customising & Remastering
Replies: 0
Last Post: 03-29-2003, 06:50 AM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Juniper Networks EX3300 EX3300-48P 48-Port Gigabit PoE+ Switch
$40.12
Juniper Networks EX2300-C 12-Port 2XSFP Uplinks PoE+ Switch P/N: EX2300-C-12P
$299.99
JUNIPER EX3400-48P 48x 1GB PoE+ RJ-45 4x 10GB SFP+ 2x 40GB QSFP+, DUAL AC POWER
$210.00
Juniper Networks EX4300-48T 48 Port Gigabit 4 QSFP 40G 2xPSU AFO Network Switch
$89.00
Juniper Networks EX3300-24P | 24 Port Gigabit Network Switch w/ Power cord
$53.99
Juniper EX3400-48P 48-Ports PoE+ 4x SFP+ and 2x QSFP+ Managed Switch Tested
$205.00
Juniper EX4600-40F-AFI 24 SFP+/SFP Ports 4 QSFP+ Ports Dual AC Switch
$999.00
Juniper EX3300-48P, 48 Port PoE+ Gigabit Network Switch w/ Power cord
$54.99
New Factory Sealed Juniper EX2300-48P Networks 48-Port Managed Ethernet Sealed
$499.00
Juniper Networks EX3300-48T 48-Port PoE+ Gigabit Ethernet Switch 4x SFP+ TESTED
$99.99