Iam making this from knoppix(my hdinstall)
I used wvdial and edited the wvdial.conf .
Now Iam connected to the internet.
Extra details: I have a fone which has a inbuilt modem (modem type=std 33600bps modem)
No linux drivers given by those guys, and they say only windows is supported. But I know Knoppix
is capable of connecting with the same fone.
I have config'ed tata fone (walky) for internet, and while dialing
I get this message in the log file for debug window.
Tell me where I have gone wrong.Code:======================================== O NO CARRIER K ATM1L1 OK ATX3 OK ATDT*777# ========================================
I get to see NO CARRIER at the dialing utility before this stage it was initializing modem
The above was config'ed in kppp. I did not try wvdial yet.
Iam waiting for more suggestions before trying it.
Iam making this from knoppix(my hdinstall)
I used wvdial and edited the wvdial.conf .
Now Iam connected to the internet.
Phone with modem? And how is it connect to the PC? With serial cable?
Yeah , com1. Serial port.
LSI 9207-8i 8-Port SAS Non-RAID 6GBPS PCIe Host Bus Adapter
$34.95
Oracle 7085209 LSI MegaRAID SAS 9361-8i 1GB Cache 12Gbps SAS/SATA PCIe RAID Card
$28.20
Cisco UCS LSI MegaRAID 9271CV-8I SAS2308 PCIe SAS Internal RAID Controller
$28.00
LSI 9223-8I 6GBPS PCIe SAS Internal RAID Controller
$22.75
Inspur LSI 9300-8i Raid Card 12Gbps HBA HDD Controller High Profile IT MODE
$15.98
LSI MegaRAID 9361-8i 12Gb PCIe 8-Port SAS/SATA RAID 1Gb w/BBU/CacheVault/License
$39.95
LSI MegaRAID 9361-8i 12Gbps PCIe 3 x8 SATA SAS 3 8 Port RAID + BBU & CacheVault
$39.00
ORICO Multi Bay RAID Hard Drive Enclosure USB 3.0/ Type-C For 2.5/3.5'' HDD SSDs
$82.49
ACASIS 2.5/3.5 inch 2 Bay SATA USB 3.0 Hard Drive Disk HDD SSD Enclosure 4 RAID
$58.99
JEYI Dual M.2 NVMe Enclosure, Touch Control 20Gbps 2-Bay Hardware RAID SSD Case
$89.90