Results 1 to 8 of 8

Thread: Knoppix DHCP help needed !

  1. #1

    Knoppix DHCP help needed !

    Hi,

    I'm using 04.15 Knoppix from CdRom.
    Everything boots fine, eth0 mentionned during boot and ipconfig gives MAC.

    However my DHCP/DNS isn't found, so network isn't available.

    I tried :
    pump -i eth0
    modconf
    netcardconfig
    ...


    What am I doing wrong ? Where can I specify the lan-ip-range/mask to be used ? (remember I'm using knoppix from CdRom)

    Thanks

    SB

  2. #2
    Found partly solution :

    Removing and re-installing followed by pump -i eth0 solves the problem.

    However, even after saving this new config to floppy, at next reboot the problem is back (even when rebooting with nodhcp)

    When doing agin modconf, at re-install, it shows the values saved on the floppy.

    Why doesn't Knoppix manage to get the eth0 started correctly ?

    Thanks

    SB

  3. #3
    Senior Member registered user
    Join Date
    Feb 2003
    Location
    Nova Scotia, Canada
    Posts
    2,479
    Have you tried using static settings if your ISP allows you to use them I have not had any problems with either dhcp or static settings so it could be problems with your connection.

    It could be the lease you got before you rebooted to knoppix. ie. You already had obtained a dhcp connection reboot and knoppix tries to get a dhcp connection and your ISP already thinks you are still connected through the old connection that has not expired.

  4. #4
    Hi, thx for replying

    I'm using my own DHCP-server, and don't have any problems with other os's (Linux, Win$, ...) connecting and I am re-using non-expired (dynamic) leases all the time.

    I'm more thinking about the default settings used by the network-driver during Bootup. The networkcard I'm using has 3 connections (Utp, Bnc, AUI) and it might well be the wrong one used during boot.

    But I asume this can't be changed as I'm booting from CdRom ?

    Kind regards

    SB

  5. #5
    Senior Member registered user
    Join Date
    Feb 2003
    Location
    Nova Scotia, Canada
    Posts
    2,479
    Quote Originally Posted by Sitting Bull
    I'm more thinking about the default settings used by the network-driver during Bootup. The networkcard I'm using has 3 connections (Utp, Bnc, AUI) and it might well be the wrong one used during boot.

    But I asume this can't be changed as I'm booting from CdRom ?
    I think you are probably right you could file a bug on the package, that way someone could look into the problem and maybe solve it.

  6. #6
    Senior Member registered user
    Join Date
    Jan 2003
    Location
    Podunk, Idaho, USA
    Posts
    470
    What kind of NIC?

    and what kind of dhcp server?

    rock

  7. #7
    NIC : 3com 3c900B-COMBO with UTP BNC AUI
    DHCP-server : Wingate-proxy

    On the same hardware used for Knoppix, this combination works with other os'es like Linux Win$ .... Of course, in those cases settings (port used) are saved to HD, but as far I remember, autosense made the nic/lan working automatically.

  8. #8
    Administrator Site Admin-
    Join Date
    Apr 2003
    Location
    USA
    Posts
    5,441

    I may have an answer for you

    Please see the threads I posted under Evidence WinXP "security updates" may break Linux and Knoppix using NatSemi DP83815 stopped working and see if it looks like what has happened to you too. I suspect this was deliberately done to you by Microsoft, but if you post back that the system you are using has not run Windows since you started using Knopix then I'm wrong and it would be helpful to know that.

Similar Threads

  1. starting DHCP server in Knoppix
    By tweaked in forum Networking
    Replies: 5
    Last Post: 10-14-2004, 05:27 PM
  2. How does Knoppix background dhcp?
    By J0hnP1pe in forum The Lounge
    Replies: 1
    Last Post: 06-16-2004, 01:22 PM
  3. Networking notworking, DHCP on Knoppix 3.3
    By Li Gwai Lo in forum Networking
    Replies: 0
    Last Post: 11-09-2003, 01:55 PM
  4. Replies: 6
    Last Post: 09-02-2003, 12:01 AM
  5. DHCP & knoppix 1/20/03
    By rec9140 in forum General Support
    Replies: 0
    Last Post: 02-24-2003, 07:08 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


~DAILY DEALZ ~ Apple Mac Pro: Intel Xeon 32GB RAM 1TB SSD 1 Year Warranty picture

~DAILY DEALZ ~ Apple Mac Pro: Intel Xeon 32GB RAM 1TB SSD 1 Year Warranty

$284.99



Dell PowerEdge R640 Server 2x Gold 6150 2.70Ghz 36-Core 256GB 2x 960GB SSD H730P picture

Dell PowerEdge R640 Server 2x Gold 6150 2.70Ghz 36-Core 256GB 2x 960GB SSD H730P

$1737.25



Dell R730xd 12LFF 2.1Ghz 16-C 128GB H730 2x10G+2x1G NIC 2x1100W 12x Trays Rails picture

Dell R730xd 12LFF 2.1Ghz 16-C 128GB H730 2x10G+2x1G NIC 2x1100W 12x Trays Rails

$717.05



Dell R730xd 12LFF 2.6Ghz 28-C 256GB H730 2x10G+2x1G NIC 2x1100W 12x Trays Rails picture

Dell R730xd 12LFF 2.6Ghz 28-C 256GB H730 2x10G+2x1G NIC 2x1100W 12x Trays Rails

$947.05



Intel Xeon Gold 6138 2.0GHz 27.5MB 20-Core 125W LGA3647 SR3B5 picture

Intel Xeon Gold 6138 2.0GHz 27.5MB 20-Core 125W LGA3647 SR3B5

$46.00



Intel Xeon E5-2690V2 3.00GHz 10-Core (SR1A5) Processor CPU READ DESCRIPTION picture

Intel Xeon E5-2690V2 3.00GHz 10-Core (SR1A5) Processor CPU READ DESCRIPTION

$12.00



Intel Xeon E5-2697 V4 2.30 GHz 18C 2011-3 2400MHz 45MB 145W SR2JV CPU Processor picture

Intel Xeon E5-2697 V4 2.30 GHz 18C 2011-3 2400MHz 45MB 145W SR2JV CPU Processor

$49.99



CM8066002031501 INTEL XEON E5-2680V4 2.40GHZ 35MB 14-CORE 120W PROCESSOR picture

CM8066002031501 INTEL XEON E5-2680V4 2.40GHZ 35MB 14-CORE 120W PROCESSOR

$19.95



HP Z840 Workstation Intel Xeon E5-2637v4 3.5GHz 32GB RAM 1.5TB HDD W10P Nvidia picture

HP Z840 Workstation Intel Xeon E5-2637v4 3.5GHz 32GB RAM 1.5TB HDD W10P Nvidia

$269.99



HP Workstation Z640 2x Xeon E5-2623V4 32GB Ram 512 SSD Quadro K420 Linux GA picture

HP Workstation Z640 2x Xeon E5-2623V4 32GB Ram 512 SSD Quadro K420 Linux GA

$243.59