I would prefer a cheatcode. By the way, how do you change the hostname? hostname command doesn't seem to be enough as i still can't samba between two Knoppix boxes
It would be very nice and useful, if the hostname of the Knoppix box would be unique. This would allow, that there are several Knoppix hosts running on the same net. Currently, if dynamic dns and DHCP is used, only the first "knoppix" host gets added to the DNS.
One easy way would be, to add the MAC adress of the 1st NIC to hostname (without the : of course). This would make the hostname look something like "knoppix-0008743EFDE2".
I would prefer a cheatcode. By the way, how do you change the hostname? hostname command doesn't seem to be enough as i still can't samba between two Knoppix boxes
Why would you use samba between 2 knoppix boxes? why not ssh or nfs?Originally Posted by amp77
That's not the point at all.Originally Posted by The-Big-E
A possible scenario might be, that there are 2+ knoppix boxes and one or more Windows machines. How do you access one specific Knoppix box using CIFS/SMB from the Windows machine?
I understand, but enable ssh on 1/both/all knoppix boxes, then access them via putty or winscp to the IP. The only time I found the hostname to be really important (at least when using live cd's and interacting with windows boxes) is when using cups.Originally Posted by A.Skwar
What are you trying to do that you would need more then I live cd running at a time anyway?
I agree that accessing by IP address is a work around, although hardly a great one. I can certainly think of lots of reasons to run with more than one Live CD though, in fact any reason to run with one Live CD would be a good reason to run with more than one. And if you want to learn about Linux networking before ditching your Windows network, it an obvious choice. Other reasons: Transfering files without having to deal with Linux to Windows issues, debugging network problems with ethereal, playing multiplayer games like Crack Attack on the 4.0.2 DVD across the local network.Originally Posted by The-Big-E
You're again missing the point. The current state of behaviour can very well be seen as a bug that needs to be fixed. The way it is now, it's *NOT* possible to access one specified box using a name. You have to know the IP.Originally Posted by The-Big-E
That's not easy. And up to know, Knoppix to me always made the impression, that it's an implmentation of "It Just Works!".
But you're right, accessing by IP is a workaround. Could you please file a bug, so that the DHCP Client doesn't try to register the hostname in DNS? Also, please try to do away with all that auto configuration. Heck, you just need to enter the correct hardware data by hand. Hardly a big deal...
I'm glad somebody mentioned using the IP address. I've been going nuts trying to use LinNeighborhood and smb4k to connect a Knoppix client to a Knoppix file server. Turns out typing smb://192.168.1.107 into Konqueror works just fine.
Yes, it does - but in Windows, this might result in Windows putting/assuming the server to be in the Internet Zone and thus be more restrictive. Further, it may slow down transfers.Originally Posted by bitey
Not so, if you use the NETBIOS name - ie. \\KNOPPIX instead of \\192.168.1.107. So, IP isn't really a solution.
All of this would work fine, if each Knoppix box had a unique hostname. Quite a simple solution for a lot of problems...
I have this exact type of setup with my remaster, I have built a custom IDS solution with distributed sensors, central server (with redundants) and remote consoles. On boot up I added a cheatcode 'hostname' that determines the type of role that the machine will perform. This type of functionality, I believe, is what some of you are after.
If so you can easily achieve this with only a few extra lines of code to the linuxrc file in miniroot.gz
If anyone is interested I'll post some possible modifications to achieve this functionality. Fortunately this type of modification should not require a complete remaster and could be tackled by the novice Knoppix tinkerer.
The proposed modification would be:
1. Instead of standard 'Knoppix' hostname, it would be be something like 'knoppix-MACADDRESS'
2. If cheatcode is supplied override hostname (eg. boot: knoppix 'hostname=knoppix-1')
USB Flash Drive Memory Stick Pendrive Thumb Drive 4GB, 8GB, 32GB, 64GB 128GB LOT
$230.40
Lot SanDisk USB Flash Drive Cruzer Blade Glade Force Ultra Flair Luxe 3.0 3.1
$149.99
1TB/2TB USB 3.0 Flash Drive Thumb U Disk Memory Stick Pen PC Laptop Storage lot
$80.39
Type C USB 3.0 Flash Drive Thumb Drive Memory Stick for PC Laptop 1TB 2TB lot
$73.29
64GB USB 3.0 Flash Drive USB Memory Stick High Speed Retractable USB Thumb Drive
$6.99
Sandisk 16GB 32GB 64GB 128GB Cruzer Blade Flash Drive Memory Stick USB Lot Pack
$4.99
1TB 2TB Type C USB 3.0 Flash Drive Thumb Drive Memory Stick for PC Laptop New
$9.99
New TESLA OEM Model S,3,X,Y USB Flash Drive for Dashcam & Sentry Mode 128GB
$18.99
Windows 11 Pro USB Flash Drive With Code
$35.00
1/ 10/ 100pcs USB 2.0 2GB, 4GB ,8GB ,16GB ,32GB ,64GB 128GB USB Flash Drives Lot
$270.00