while looking around here it seems that it are X11 settings.
how can I change those settings in X11?
i'm really new to this.
and I would like to learn Linux
first of all i would like to thank all the people involved with Knoppix.
i got it running without problems.
i never got suse, rethat or any other working before.
but now i would like to know how i can boot it with automatic values.
i always need to type 'knoppix screen=1024x768 depth=24 wheelmouse'
but before i'm done with typing all that i'm a min later. (not a fast typer)
so where can i put those values to boot like that automaticly?
Thanks
while looking around here it seems that it are X11 settings.
how can I change those settings in X11?
i'm really new to this.
and I would like to learn Linux
OK, after booting with all your special settings on (from boot: screen with knopppix commands) click the K in the bottom left corner of the desktop.
Make sure you have a linux formatted disk in the floppy drive (boot disk is ok).
Then click KNOPPIX and then clickk Save KNOPPIX Config.
This creates a knoppix.sh bash file and saves it on the floppy saving your desired settings.
To boot up again with those settings without having to type them every time on the boot: screen, make sure that same disk is in the floppy drive and just type at the boot: knoppix floppyconfig.
That should do it!
Good Luck,
OK, after booting with all your special settings on (from boot: screen with knopppix commands) click the K in the bottom left corner of the desktop.
Make sure you have a linux formatted disk in the floppy drive (boot disk is ok).
Then click KNOPPIX and then clickk Save KNOPPIX Config.
This creates a knoppix.sh bash file and saves it on the floppy saving your desired settings.
To boot up again with those settings without having to type them every time on the boot: screen, make sure that same disk is in the floppy drive and just type at the boot: knoppix floppyconfig.
That should do it!
Good Luck,
OK, after booting with all your special settings on (from boot: screen with knopppix commands) click the K in the bottom left corner of the desktop.
Make sure you have a linux formatted disk in the floppy drive (boot disk is ok).
Then click KNOPPIX and then clickk Save KNOPPIX Config.
This creates a knoppix.sh bash file and saves it on the floppy saving your desired settings.
To boot up again with those settings without having to type them every time on the boot: screen, make sure that same disk is in the floppy drive and just type at the boot: knoppix floppyconfig.
That should do it!
Good Luck,
OK, after booting with all your special settings on (from boot: screen with knopppix commands) click the K in the bottom left corner of the desktop.
Make sure you have a linux formatted disk in the floppy drive (boot disk is ok).
Then click KNOPPIX and then clickk Save KNOPPIX Config.
This creates a knoppix.sh bash file and saves it on the floppy saving your desired settings.
To boot up again with those settings without having to type them every time on the boot: screen, make sure that same disk is in the floppy drive and just type at the boot: knoppix floppyconfig.
That should do it!
Good Luck,
to: Allowee
re: hdd install
OK, after booting with all your special settings on (from boot: screen with knopppix commands) click the K in the bottom left corner of the desktop.
Make sure you have a linux formatted disk in the floppy drive (boot disk is ok).
Then click KNOPPIX and then clickk Save KNOPPIX Config.
This creates a knoppix.sh bash file and saves it on the floppy saving your desired settings.
To boot up again with those settings without having to type them every time on the boot: screen, make sure that same disk is in the floppy drive and just type at the boot: knoppix floppyconfig.
That should do it!
Good Luck,
sorry, knoppix.net kept saying send error!
Did it say "failed to send email?" It's been happening to me too. I haven't been getting reply notifications either- something's fishy around here.Originally Posted by A. Jorge Garcia
Allowee-
Did you install Knoppix to your hard drive or are you booting from cd?
HPGYT DELL 960GB SATA 6Gb/s 2.5in Internal SSD 0HPGYT MTFDDAK960TCB
$59.00
G5T03 Dell Intel DC S3700 Series 800GB SATA 6Gb/s 2.5" SSD 0G5T03 SSDSC2BA800G3E
$55.00
Brand New 128GB-240GB-256GB-512GB 2.5 inch SATA3 Solid State Drive 2.5" SSD
$17.99
ACASIS 2.5/3.5 inch 2 Bay SATA USB 3.0 Hard Drive Disk HDD SSD Enclosure 4 RAID
$58.99
Patriot P210 128GB 256GB 512GB 1TB 2TB 2.5" SATA 3 6GB/s Internal SSD PC/MAC Lot
$14.99
Netac 1TB 2TB 512GB Internal SSD 2.5'' SATA III 6Gb/s Solid State Drive lot
$13.99
Fanxiang SSD 512GB 1TB 2TB 4TB 2.5'' SSD SATA III Internal Solid State Drive lot
$13.99
Samsung - Geek Squad Certified Refurbished 980 PRO 1TB Internal SSD PCIe Gen ...
$71.99
Fanxiang 4TB 2TB 1TB SSD 550MB/s 2.5'' SATA III Internal Solid State Drive lot
$209.99
Fanxiang 256GB 512GB 1TB 2TB 4TB Internal SSD 2.5" SATA III 6GB/s for PC/MAC Lot
$178.19