Results 1 to 10 of 10

Thread: a 'noob' question about booting from hd

  1. #1
    Junior Member
    Join Date
    Apr 2003
    Posts
    5

    a 'noob' question about booting from hd

    first of all i would like to thank all the people involved with Knoppix.

    i got it running without problems.
    i never got suse, rethat or any other working before.


    but now i would like to know how i can boot it with automatic values.

    i always need to type 'knoppix screen=1024x768 depth=24 wheelmouse'
    but before i'm done with typing all that i'm a min later. (not a fast typer)

    so where can i put those values to boot like that automaticly?

    Thanks

  2. #2
    Junior Member
    Join Date
    Apr 2003
    Posts
    5
    while looking around here it seems that it are X11 settings.

    how can I change those settings in X11?
    i'm really new to this.
    and I would like to learn Linux

  3. #3
    Senior Member registered user
    Join Date
    Nov 2002
    Location
    Long Island, NY, USA
    Posts
    1,256
    OK, after booting with all your special settings on (from boot: screen with knopppix commands) click the K in the bottom left corner of the desktop.

    Make sure you have a linux formatted disk in the floppy drive (boot disk is ok).

    Then click KNOPPIX and then clickk Save KNOPPIX Config.

    This creates a knoppix.sh bash file and saves it on the floppy saving your desired settings.

    To boot up again with those settings without having to type them every time on the boot: screen, make sure that same disk is in the floppy drive and just type at the boot: knoppix floppyconfig.

    That should do it!

    Good Luck,

  4. #4
    Senior Member registered user
    Join Date
    Nov 2002
    Location
    Long Island, NY, USA
    Posts
    1,256
    OK, after booting with all your special settings on (from boot: screen with knopppix commands) click the K in the bottom left corner of the desktop.

    Make sure you have a linux formatted disk in the floppy drive (boot disk is ok).

    Then click KNOPPIX and then clickk Save KNOPPIX Config.

    This creates a knoppix.sh bash file and saves it on the floppy saving your desired settings.

    To boot up again with those settings without having to type them every time on the boot: screen, make sure that same disk is in the floppy drive and just type at the boot: knoppix floppyconfig.

    That should do it!

    Good Luck,

  5. #5
    Senior Member registered user
    Join Date
    Nov 2002
    Location
    Long Island, NY, USA
    Posts
    1,256
    OK, after booting with all your special settings on (from boot: screen with knopppix commands) click the K in the bottom left corner of the desktop.

    Make sure you have a linux formatted disk in the floppy drive (boot disk is ok).

    Then click KNOPPIX and then clickk Save KNOPPIX Config.

    This creates a knoppix.sh bash file and saves it on the floppy saving your desired settings.

    To boot up again with those settings without having to type them every time on the boot: screen, make sure that same disk is in the floppy drive and just type at the boot: knoppix floppyconfig.

    That should do it!

    Good Luck,

  6. #6
    Senior Member registered user
    Join Date
    Nov 2002
    Location
    Long Island, NY, USA
    Posts
    1,256
    OK, after booting with all your special settings on (from boot: screen with knopppix commands) click the K in the bottom left corner of the desktop.

    Make sure you have a linux formatted disk in the floppy drive (boot disk is ok).

    Then click KNOPPIX and then clickk Save KNOPPIX Config.

    This creates a knoppix.sh bash file and saves it on the floppy saving your desired settings.

    To boot up again with those settings without having to type them every time on the boot: screen, make sure that same disk is in the floppy drive and just type at the boot: knoppix floppyconfig.

    That should do it!

    Good Luck,

  7. #7
    Senior Member registered user
    Join Date
    Nov 2002
    Location
    Long Island, NY, USA
    Posts
    1,256
    to: Allowee
    re: hdd install

    OK, after booting with all your special settings on (from boot: screen with knopppix commands) click the K in the bottom left corner of the desktop.

    Make sure you have a linux formatted disk in the floppy drive (boot disk is ok).

    Then click KNOPPIX and then clickk Save KNOPPIX Config.

    This creates a knoppix.sh bash file and saves it on the floppy saving your desired settings.

    To boot up again with those settings without having to type them every time on the boot: screen, make sure that same disk is in the floppy drive and just type at the boot: knoppix floppyconfig.

    That should do it!

    Good Luck,

  8. #8
    Senior Member registered user
    Join Date
    Nov 2002
    Location
    Long Island, NY, USA
    Posts
    1,256
    sorry, knoppix.net kept saying send error!

  9. #9
    Senior Member registered user
    Join Date
    Mar 2003
    Location
    colorado springs, colorado
    Posts
    1,933
    Quote Originally Posted by A. Jorge Garcia
    sorry, knoppix.net kept saying send error!
    Did it say "failed to send email?" It's been happening to me too. I haven't been getting reply notifications either- something's fishy around here.

  10. #10
    Senior Member registered user
    Join Date
    Mar 2003
    Location
    colorado springs, colorado
    Posts
    1,933
    Allowee-

    Did you install Knoppix to your hard drive or are you booting from cd?

Similar Threads

  1. im a noob please help me - booting problem with CD
    By mklboi in forum General Support
    Replies: 1
    Last Post: 04-01-2004, 10:00 PM
  2. simple Noob Question
    By zombi3 in forum General Support
    Replies: 5
    Last Post: 12-25-2003, 07:05 AM
  3. yet another noob question
    By mstlyharmlss in forum General Support
    Replies: 2
    Last Post: 11-08-2003, 09:19 PM
  4. Noob Question
    By philski27 in forum General Support
    Replies: 3
    Last Post: 11-08-2003, 01:17 AM
  5. Noob question - don't laugh please
    By Enmity in forum Customising & Remastering
    Replies: 6
    Last Post: 11-07-2003, 10:37 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Lenovo SATA Solid State Internal Hard Drive ST800, 128GB/256GB/512GB/1TB, NEW picture

Lenovo SATA Solid State Internal Hard Drive ST800, 128GB/256GB/512GB/1TB, NEW

$45.99



Samsung 1TB 850 EVO SSD MZ-75E1T0 2.5

Samsung 1TB 850 EVO SSD MZ-75E1T0 2.5" SATA III Internal Solid State Drive

$113.50



CISCO AIR-SD240GBKS4-EV 240GB 2.5 SATA 6G SSD WLC 5520 & 8540 picture

CISCO AIR-SD240GBKS4-EV 240GB 2.5 SATA 6G SSD WLC 5520 & 8540

$175.00



Intel 600GB S3500 SSD 6Gb/s 2.5

Intel 600GB S3500 SSD 6Gb/s 2.5" SATA SSD SSDSC2BB600G4 Solid State Drive

$48.99



Crucial BX500 240GB Internal SSD,Micron 3D NAND SATA CT240BX500SSD1 - OEM item picture

Crucial BX500 240GB Internal SSD,Micron 3D NAND SATA CT240BX500SSD1 - OEM item

$16.99



Netac 1TB 2TB 512GB Internal SSD 2.5'' SATA III 6Gb/s Solid State Drive lot picture

Netac 1TB 2TB 512GB Internal SSD 2.5'' SATA III 6Gb/s Solid State Drive lot

$13.99



Western Digital  WDS500G1B0A-00H9H0 500GB 2.5

Western Digital WDS500G1B0A-00H9H0 500GB 2.5" SSD Grade A SKU 5036

$18.99



Patriot P210 128GB 256GB 512GB 1TB 2TB 2.5

Patriot P210 128GB 256GB 512GB 1TB 2TB 2.5" SATA 3 6GB/s Internal SSD PC/MAC Lot

$14.99



Fanxiang SSD 512GB 1TB 2TB 4TB 2.5'' SSD SATA III Internal Solid State Drive lot picture

Fanxiang SSD 512GB 1TB 2TB 4TB 2.5'' SSD SATA III Internal Solid State Drive lot

$198.99



Fanxiang 256GB 512GB 1TB 2TB 4TB Internal SSD 2.5

Fanxiang 256GB 512GB 1TB 2TB 4TB Internal SSD 2.5" SATA III 6GB/s for PC/MAC Lot

$197.99