while looking around here it seems that it are X11 settings.
how can I change those settings in X11?
i'm really new to this.
and I would like to learn Linux
first of all i would like to thank all the people involved with Knoppix.
i got it running without problems.
i never got suse, rethat or any other working before.
but now i would like to know how i can boot it with automatic values.
i always need to type 'knoppix screen=1024x768 depth=24 wheelmouse'
but before i'm done with typing all that i'm a min later. (not a fast typer)
so where can i put those values to boot like that automaticly?
Thanks
while looking around here it seems that it are X11 settings.
how can I change those settings in X11?
i'm really new to this.
and I would like to learn Linux
OK, after booting with all your special settings on (from boot: screen with knopppix commands) click the K in the bottom left corner of the desktop.
Make sure you have a linux formatted disk in the floppy drive (boot disk is ok).
Then click KNOPPIX and then clickk Save KNOPPIX Config.
This creates a knoppix.sh bash file and saves it on the floppy saving your desired settings.
To boot up again with those settings without having to type them every time on the boot: screen, make sure that same disk is in the floppy drive and just type at the boot: knoppix floppyconfig.
That should do it!
Good Luck,
OK, after booting with all your special settings on (from boot: screen with knopppix commands) click the K in the bottom left corner of the desktop.
Make sure you have a linux formatted disk in the floppy drive (boot disk is ok).
Then click KNOPPIX and then clickk Save KNOPPIX Config.
This creates a knoppix.sh bash file and saves it on the floppy saving your desired settings.
To boot up again with those settings without having to type them every time on the boot: screen, make sure that same disk is in the floppy drive and just type at the boot: knoppix floppyconfig.
That should do it!
Good Luck,
OK, after booting with all your special settings on (from boot: screen with knopppix commands) click the K in the bottom left corner of the desktop.
Make sure you have a linux formatted disk in the floppy drive (boot disk is ok).
Then click KNOPPIX and then clickk Save KNOPPIX Config.
This creates a knoppix.sh bash file and saves it on the floppy saving your desired settings.
To boot up again with those settings without having to type them every time on the boot: screen, make sure that same disk is in the floppy drive and just type at the boot: knoppix floppyconfig.
That should do it!
Good Luck,
OK, after booting with all your special settings on (from boot: screen with knopppix commands) click the K in the bottom left corner of the desktop.
Make sure you have a linux formatted disk in the floppy drive (boot disk is ok).
Then click KNOPPIX and then clickk Save KNOPPIX Config.
This creates a knoppix.sh bash file and saves it on the floppy saving your desired settings.
To boot up again with those settings without having to type them every time on the boot: screen, make sure that same disk is in the floppy drive and just type at the boot: knoppix floppyconfig.
That should do it!
Good Luck,
to: Allowee
re: hdd install
OK, after booting with all your special settings on (from boot: screen with knopppix commands) click the K in the bottom left corner of the desktop.
Make sure you have a linux formatted disk in the floppy drive (boot disk is ok).
Then click KNOPPIX and then clickk Save KNOPPIX Config.
This creates a knoppix.sh bash file and saves it on the floppy saving your desired settings.
To boot up again with those settings without having to type them every time on the boot: screen, make sure that same disk is in the floppy drive and just type at the boot: knoppix floppyconfig.
That should do it!
Good Luck,
sorry, knoppix.net kept saying send error!
Did it say "failed to send email?" It's been happening to me too. I haven't been getting reply notifications either- something's fishy around here.Originally Posted by A. Jorge Garcia
Allowee-
Did you install Knoppix to your hard drive or are you booting from cd?
Intel PCIe SSD AIC RAID Controller Card G97168-252
$44.55
LSI 9305-16i SATA SAS 12Gbs RAID Controller PCIe 3.0 x8 IT-Mode 4* 8643 SATA
$229.99
Cisco UCS LSI MegaRAID 9271CV-8I SAS2308 PCIe SAS Internal RAID Controller
$28.00
Dell HBA330 12GBPS SAS Internal HBA Controller (NON-RAID) PCIe Card J7TNV 0J7TNV
$40.95
Inspur LSI 9300-8i Raid Card 12Gbps HBA HDD Controller High Profile IT MODE
$15.98
LSI MegaRAID 9361-8i 12Gb PCIe 8-Port SAS/SATA RAID 1Gb w/BBU/CacheVault/License
$39.95
ORICO Multi Bay RAID Hard Drive Enclosure USB 3.0/ Type-C For 2.5/3.5'' HDD SSDs
$87.99
Dell PowerEdge RAID Controller HBA330 12Gbs PCIe 3.0 SAS SATA J7TNV Low Profile
$29.00
4 Bay RAID External Hard Drive Enclosure for 2.5/3.5" SATA HDD/SSD
$79.99
G TECHNOLOGY G RAID 0G04228 2-Bay Thunderbolt 2 RAID Array W/Power Supply
$99.99