See the How-To here.
Hi folks,
Another noobe here. I'm sure this has been asked and answered before but I'm being overwhelmed with new terminology.
Before I make the partitioning and installation plunge I'd like to run the cd image for a while, but from hd for speed. When I look at my boot floppy and startup sequence I see:
Loading vmlinuz (no extension)
Loading miniroot.gz
Can I just write a batch file that points to these and then to the cd image on my hd? Then exit to DOS, run the batch file and go?
What's the difference between saving Knoppix config on the boot floppy and "persistent home"?
See the How-To here.
Thanks Stephen, RTFM usually works but it didn't. Here's what I did:
But it didn't work. All I got was a bunch of "can't find file" messages."Poormans install"
Copy the CD:\KNOPPIX\KNOPPIX file to HD:\KNOPPIX\
E:\KNOPPIX\>mkdir D:\KNOPPIX
E:\KNOPPIX\>copy KNOPPIX D:\KNOPPIX\
1 files(s) copied
Make the bootfloppy. Start "mkfloppy.bat" on the CD in the KNOPPIX folder.
E:\KNOPPIX\>mkfloppy
Boot from the floppy. It should scan for the KNOPPIX file and find it on the harddisk.
The deviation I made from the instructions was to copy the entire cd to C:\Knoppix and ran mkfloppy from there. I'm not sure what the E: is. I have 1 physical HD with C and D logical partitions, and CD's E and F.
I don't have to add a new partition (yet) do I?
Try it with the just the /knoppix directory from the CD in c:\ not with it in a c:\knoppix.
That did it. All I needed on the hd was c:\knoppix\knoppix (file - not folder). I think the manual overcomplicated it.
Thanks for your help.
That's what I thought good luck.
I followed everything from this post but I am still getting this message:
"Cant find KNOPPIX filesystem,sorry. Dropping you to a (very limited) shell. Press reset button to quit."
I am beginner.
Thanks!
bong
OK, I figured out how to run KNOPPIX with neither the CD nor the boot floppy from the hdd without knx-hdinstall. I don't like knx-hdinstall as you loose all the KNOPPIX autodetection stuff!
Here are my steps (only for WIN95/98/ME on a VFAT partition):
(1) On your M$ WINDOZE box, mine is WINME, create a directory called c:\KNOPPIX.
(2) Copy from d:\KNOPPIX\KNOPPIX, the huge 690MB file on the KNOPPIX CD already burned from an ISO, to c:\KNOPPIX.
(3) Copy the files vmlinuz and miniroot.gz from the boot floppy, already rawritten from boot-en.img, to c:\KNOPPIX.
(4) Download a copy of loadlin.exe to c:\KNOPPIX from the net.
(5) Write the following batch file in Notepad, save as knoppix.bat in c:\KNOPPIX, its all one line.
loadlin.exe vmlinuz lang=en init=/etc/init initrd=miniroot.gz quiet BOOT_IMAGE=knoppix
(6) In WIN95 or 98, make a shortcut for knoppix.bat on your desktop. You can't run a batch file in real-mode DOS with WINME, you have to run knoppix.bat from the rescue disk in console mode....
(7) Click on this shortcut and viola KNOPPIX boots faster from your hdd than from your CD, and it still autodetects everything and resides in the ramdisk.
BTW, one side effect is that you cannot mount your hdd as its busy reading from KNOPPIX/KNOPPIX just as the CD used to be tied up.
Also, if you do not want to rawrite the boot floppy or burn the CD, you can mount the ISO and IMG to extract the files KNOPPIX, vmlinuz and miniroot.gz (but you need a Linux box for this already - which came first the penguin or the egg???).
will this also work with NTFS... or just FAT32
just FAT32
rock
A-Tech 8GB DDR3 1600 PC3-12800 Laptop SODIMM 204-Pin Memory RAM PC3L DDR3L 1x 8G
$13.99
HyperX FURY DDR3 8GB 16GB 32GB 1600 MHz PC3-12800 Desktop RAM Memory DIMM 240pin
$12.90
A-Tech 8GB PC3-12800 Desktop DDR3 1600 MHz Non ECC 240-Pin DIMM Memory RAM 1x 8G
$13.99
Lot of 2 32GB DDR4 2666 PC4-21300 SODIMM RAM Modules Mixed Brand
$60.00
HyperX FURY RAM DDR4 16GB 8GB 32GB 4GB 3200 2666 2400 2133 Desktop Memory DIMM
$9.64
Samsung 128GB (4x 32GB) M86B4G70DM0-CMA3 PC3-14900L 4Rx4 DDR3 ECC Reg Server Mem
$39.99
Kingston HyperX FURY DDR3 8GB 16GB 32G 1600 1866 1333 Desktop Memory RAM DIMM
$13.25
Samsung 16GB 2Rx4 PC4-2400 RDIMM DDR4-19200 ECC REG Registered Server Memory RAM
$20.99
A-Tech 256GB 4x 64GB 4Rx4 PC4-19200 ECC Load Reduced LRDIMM Server Memory RAM
$287.96
A-Tech 128GB 2x 64GB 4Rx4 PC4-19200 ECC Load Reduced LRDIMM Server Memory RAM
$143.98