Try the HD Based How-To it has the information you require.
Thinkpad 240x. It has a CD drive, but it is external and connects to the computer via a PCMCIA card. It is a Toshiba XM-1902B. It is not listed as a boot device in the BIOS.
I made a boot disk using boot.img provided in the KNOPPIX difectory. My Thinkpad 240x thankfully boots up the floppy without problems, however when it fails to detect the CDROM drive and gives me this message:
My next thought is to copy the entire *.iso onto one of my ext2 partitions and then mount the *.iso through loopback ie.Code:Can't find KNOPPIX filesystem, sorry. Dropping you to a (very limited) shell. Press reset button to quit.
orCode:knoppix# mount -o loop /mnt/win/KNOPPIX.iso /mnt/kpx
Does anyone think this will work? how can I `boot` to KNOPPIX after I get the *.iso mounted? I am using KNOPPIX version 3.2 from 4-15-2003Code:knoppix# mount -t iso9660 /mnt/win/KNOPPIX.iso /mnt/kpx
Try the HD Based How-To it has the information you require.
I'm wondering if this would work http://btmgr.gnuchina.org/
I've been told that it will allow Knoppix to work on boxes that won't normallly boot from a CD.
I don't know how it will work with regard to your PCMCIA setup.
I have tried btmgr, and it doesn't workit doesn't detect PCMCIA driver properly!
On a happier note I followed the previous port instructions on howto install from a hard drive! worked like a charm, hopefully now I can get gentoo up and running!
--Anuj
What I did was copy the KNOPPIX/KNOPPIX file off the burned CD to hda1 and then used the boot-en.img rawritten floppy. This boot floppy will look for the huge KNOPPIX file on all your partitions.
Good Luck,
New Precision DWDM SFP+ 10G 80km Tunable Transceiver 50GHz C-Temp DWDM-SFP10G-C
$90.00
LOT OF 20 Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module
$95.00
SFP-10G-SR CISCO 10G SR SFP+ C-CLASS TRANSCEIVER 10 PACK
$99.00
LOT OF 10 455883-B21 HP 10Gb SR SFP Transceiver 455885-001 456096-001
$59.99
ProLabs 10GBase-TX SFP+ RJ-45 Copper Transceiver Module P/N: SFP-10GBASE-T-C NEW
$34.99
Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module 10-2415-03
$8.00
Lot of 2 FS SFP-GB-GE-T 10/100/1000 Base T SFP 100m Transceivers
$19.99
Mellanox Original MFM1T02A-SR 10GbE 10GBASE-SR SFP+ Transceiver
$9.00
Lot (10) Dell 0N8TDR 850nm SFP-10G-SR-85C 10Gbs sfp+ FTLX8574D3BNL-FC N8TDR NEW
$68.00
New Sealed Cisco SFP-10G-LR 10GBASE-LR SFP Plug-in GBIC Transceiver module A
$15.80