Try the HD Based How-To it has the information you require.
Thinkpad 240x. It has a CD drive, but it is external and connects to the computer via a PCMCIA card. It is a Toshiba XM-1902B. It is not listed as a boot device in the BIOS.
I made a boot disk using boot.img provided in the KNOPPIX difectory. My Thinkpad 240x thankfully boots up the floppy without problems, however when it fails to detect the CDROM drive and gives me this message:
My next thought is to copy the entire *.iso onto one of my ext2 partitions and then mount the *.iso through loopback ie.Code:Can't find KNOPPIX filesystem, sorry. Dropping you to a (very limited) shell. Press reset button to quit.
orCode:knoppix# mount -o loop /mnt/win/KNOPPIX.iso /mnt/kpx
Does anyone think this will work? how can I `boot` to KNOPPIX after I get the *.iso mounted? I am using KNOPPIX version 3.2 from 4-15-2003Code:knoppix# mount -t iso9660 /mnt/win/KNOPPIX.iso /mnt/kpx
Try the HD Based How-To it has the information you require.
I'm wondering if this would work http://btmgr.gnuchina.org/
I've been told that it will allow Knoppix to work on boxes that won't normallly boot from a CD.
I don't know how it will work with regard to your PCMCIA setup.
I have tried btmgr, and it doesn't work it doesn't detect PCMCIA driver properly!
On a happier note I followed the previous port instructions on howto install from a hard drive! worked like a charm, hopefully now I can get gentoo up and running!
--Anuj
What I did was copy the KNOPPIX/KNOPPIX file off the burned CD to hda1 and then used the boot-en.img rawritten floppy. This boot floppy will look for the huge KNOPPIX file on all your partitions.
Good Luck,
Juniper Networks EX2300-48P 48 Port Gigabit PoE 4 SFP 1/10G Network Switch
$185.00
Juniper Networks EX2300-C-12T Compact 12-Port EX2300-C Series Ethernet Switch
$300.00
Juniper Networks EX2200-C-12P-2G Gigabit Ethernet Managed Switch
$79.99
Juniper EX4550-32F-AFI Switch Dual PSU [BIN]
$350.00
Juniper Networks EX2200-C Ethernet Managed Switch w/ Rack Mounts
$74.99
Juniper Networks EX3300 EX3300-48P 48-Port Gigabit PoE+ Switch
$59.95
Juniper New Sealed EX4400-48T EX4400 Switch 48x1G 2x25G & 2x100G
$1495.00
Juniper EX2200-C-12T-2G 12-Port 10/100/1000 2x SFP Uplinks Compact Switch
$74.99
Juniper Networks SRX220 8-Port Gigabit Services Gateway Security Appliance
$45.00
JUNIPER ELECTRONICS NFX250-ATT-LS1
$250.00