Try the HD Based How-To it has the information you require.
Thinkpad 240x. It has a CD drive, but it is external and connects to the computer via a PCMCIA card. It is a Toshiba XM-1902B. It is not listed as a boot device in the BIOS.
I made a boot disk using boot.img provided in the KNOPPIX difectory. My Thinkpad 240x thankfully boots up the floppy without problems, however when it fails to detect the CDROM drive and gives me this message:
My next thought is to copy the entire *.iso onto one of my ext2 partitions and then mount the *.iso through loopback ie.Code:Can't find KNOPPIX filesystem, sorry. Dropping you to a (very limited) shell. Press reset button to quit.
orCode:knoppix# mount -o loop /mnt/win/KNOPPIX.iso /mnt/kpx
Does anyone think this will work? how can I `boot` to KNOPPIX after I get the *.iso mounted? I am using KNOPPIX version 3.2 from 4-15-2003Code:knoppix# mount -t iso9660 /mnt/win/KNOPPIX.iso /mnt/kpx
Try the HD Based How-To it has the information you require.
I'm wondering if this would work http://btmgr.gnuchina.org/
I've been told that it will allow Knoppix to work on boxes that won't normallly boot from a CD.
I don't know how it will work with regard to your PCMCIA setup.
I have tried btmgr, and it doesn't workit doesn't detect PCMCIA driver properly!
On a happier note I followed the previous port instructions on howto install from a hard drive! worked like a charm, hopefully now I can get gentoo up and running!
--Anuj
What I did was copy the KNOPPIX/KNOPPIX file off the burned CD to hda1 and then used the boot-en.img rawritten floppy. This boot floppy will look for the huge KNOPPIX file on all your partitions.
Good Luck,
Dell PowerEdge M620 Blade Server 2 x Xeon e5 2665 8 x 16 GB(128) RAM - No HD
$44.99
HP ProLiant BL460c Gen9 Blade 2x E5-2680v3 2.5GHz =24 Cores, No RAM/HDD
$100.00
Dell PowerEdge M620 Blade Server 2x 10C E5-2690v2 64GB Ram 2x 600GB 10k HDD
$125.00
Dell PowerEdge FX2S FC830 Blade Server Chassis Enclosure 2*2000W PSU NO BLADES
$299.99
Cisco UCSB-B200-M5 Barebones CTO Blade Server No RAM, No CPU, No HD
$287.00
Dell PowerEdge FX2s CTO Blade 4 Slot 2U Chassis 2x 2000W
$399.00
Dell PowerEdge FC830 8-SFF 4*Xeon E5-4669v3 2.1GHz No HDD/RAM Blade Server Node
$199.99
Dell PowerEdge M520 Blade Server Xeon E5-2403 NO HDD NO RAM
$40.00
HP ProLiant BL460c Gen9 Blade 2x E5-2690v4 2.6GHz =28 Cores 32GB P246 650FLB
$219.00
DELL PowerEdge M630 Blade 2x E5-2699v3 2.3GHz =36 Cores 128GB H330 2x10Gb X520
$305.00