Try the HD Based How-To it has the information you require.
Thinkpad 240x. It has a CD drive, but it is external and connects to the computer via a PCMCIA card. It is a Toshiba XM-1902B. It is not listed as a boot device in the BIOS.
I made a boot disk using boot.img provided in the KNOPPIX difectory. My Thinkpad 240x thankfully boots up the floppy without problems, however when it fails to detect the CDROM drive and gives me this message:
My next thought is to copy the entire *.iso onto one of my ext2 partitions and then mount the *.iso through loopback ie.Code:Can't find KNOPPIX filesystem, sorry. Dropping you to a (very limited) shell. Press reset button to quit.
orCode:knoppix# mount -o loop /mnt/win/KNOPPIX.iso /mnt/kpx
Does anyone think this will work? how can I `boot` to KNOPPIX after I get the *.iso mounted? I am using KNOPPIX version 3.2 from 4-15-2003Code:knoppix# mount -t iso9660 /mnt/win/KNOPPIX.iso /mnt/kpx
Try the HD Based How-To it has the information you require.
I'm wondering if this would work http://btmgr.gnuchina.org/
I've been told that it will allow Knoppix to work on boxes that won't normallly boot from a CD.
I don't know how it will work with regard to your PCMCIA setup.
I have tried btmgr, and it doesn't work it doesn't detect PCMCIA driver properly!
On a happier note I followed the previous port instructions on howto install from a hard drive! worked like a charm, hopefully now I can get gentoo up and running!
--Anuj
What I did was copy the KNOPPIX/KNOPPIX file off the burned CD to hda1 and then used the boot-en.img rawritten floppy. This boot floppy will look for the huge KNOPPIX file on all your partitions.
Good Luck,
Cisco 2801 Integrated Services Router ISR w/ WIC-1DSU-1-v2, VIC2-2FXS CISCO2801
$59.99
Cisco 2900 Series CISCO2951/K9 v03 Integrated Services Router
$54.99
Cisco Nexus 48-Port 10G SFP+ Switch N9K-9396PX w/ 9K-M12PQ 12-Port 40G QSFP
$249.99
Cisco WS-C3850-48P-L 48-Port Gigabit 3850 PoE Switch w/ 715W+ C3850-NM-4-1G Mod
$83.00
Cisco QSFP-40G-SR-BD BiDi Short-reach Transceiver, 1 Year Warranty
$17.25
Cisco C3850-NM-2-10G 2 Port Network Exp.Module for 3850
$38.99
Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module 10-2415-03
$8.00
Cisco WS-C3850-48F-S Catalyst 3850 48x 1GB PoE+ RJ-45 1x Module Switch
$185.00
Cisco WS-C3850-48P-L 48-Port Gigabit 3850 PoE Switch w/ 715W Network Switch
$41.43