Try the HD Based How-To it has the information you require.
Thinkpad 240x. It has a CD drive, but it is external and connects to the computer via a PCMCIA card. It is a Toshiba XM-1902B. It is not listed as a boot device in the BIOS.
I made a boot disk using boot.img provided in the KNOPPIX difectory. My Thinkpad 240x thankfully boots up the floppy without problems, however when it fails to detect the CDROM drive and gives me this message:
My next thought is to copy the entire *.iso onto one of my ext2 partitions and then mount the *.iso through loopback ie.Code:Can't find KNOPPIX filesystem, sorry. Dropping you to a (very limited) shell. Press reset button to quit.
orCode:knoppix# mount -o loop /mnt/win/KNOPPIX.iso /mnt/kpx
Does anyone think this will work? how can I `boot` to KNOPPIX after I get the *.iso mounted? I am using KNOPPIX version 3.2 from 4-15-2003Code:knoppix# mount -t iso9660 /mnt/win/KNOPPIX.iso /mnt/kpx
Try the HD Based How-To it has the information you require.
I'm wondering if this would work http://btmgr.gnuchina.org/
I've been told that it will allow Knoppix to work on boxes that won't normallly boot from a CD.
I don't know how it will work with regard to your PCMCIA setup.
I have tried btmgr, and it doesn't work it doesn't detect PCMCIA driver properly!
On a happier note I followed the previous port instructions on howto install from a hard drive! worked like a charm, hopefully now I can get gentoo up and running!
--Anuj
What I did was copy the KNOPPIX/KNOPPIX file off the burned CD to hda1 and then used the boot-en.img rawritten floppy. This boot floppy will look for the huge KNOPPIX file on all your partitions.
Good Luck,
Cisco Systems NCS2K-20-SMRFS-L optical multiplexor CISCO EXCESS
$3599.00
Cisco SG110 24 Port Gigabit Ethernet Switch w/ 2 x SFP SG110-24
$117.00
Cisco QSFP-40/100-SRBD 100GE/40GE BASE-SR-BiDi LC QSFP Transceiver Hologram 1PCS
$200.00
Cisco RV160 VPN Router 4 Gigabit Ethernet Ports RV160-K9-AR
$80.00
Cisco WS-C3850-48P-L 48-Port Gigabit 3850 PoE Switch w/ 715W+ C3850-NM-4-1G Mod
$83.00
Cisco Catalyst WS-C2960-48TT-L V02 48 Port Fast Ethernet Switch
$34.00
Cisco C3850-NM-2-10G 2 Port Network Exp.Module for 3850
$38.99
Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module 10-2415-03
$8.00
Cisco WS-C3850-48P-L 48-Port Gigabit 3850 PoE Switch w/ 715W Network Switch
$41.58
Cisco MS410-16-HW 16 Ports Fully Managed Ethernet Switch NEW Unclaimed
$999.99