Try manually getting one via dhcp
ifconfig ath0 up
pump -i ath0
I have a dell laptop with Knoppix 3.9 installed. I bought a new Proxim gold card that uses Atheros (madwifi) drivers. It works ok on my network with my windows setup but I am having an issue with Knoppix 3.9. Knoppix ses the card and with IWCONFIG and KWIFIMANAGER I can see my network and even other networks in my area but I am not getting an IP address. I made sure that Encription and Mac address filtering were turned off and I still can not get IP. Again it works ok with my windows setup but not knoppix.
My Knoppix setup does work with my linksys card but I really wanted to use the proxim because of the external antenna.
Any ideas of what I am doing wrong?
Try manually getting one via dhcp
ifconfig ath0 up
pump -i ath0
I did not know that pump command but it worked!!!Originally Posted by foamrotreturns
Thanks big time!!
There are too many dhcp commands to remember these days and it seems every distro uses a different one.
for future reference, and if that one doesn't work for you (you being any person reading this thread) you might try these as well:
dhclient
dhcpcd
IBM Power S822 8284-22A 12SFF Power8 3.89GHz 6Core 64GB RAM No HDD Server System
$359.99
IBM Server System X3100 M4 | Xeon @ 3.10 Ghz | 8GB | 250GB HDD No OS (IG-PC26)
$96.01
IBM System X3250 M3 Server 8GB RAM Intel Xeon x3440 2.53ghz (NO HDD)
$36.53
$4750.00
IBM System x3550 M3 Dual Intel Xeon X5650 @2.67GHz 32GB RAM No HDD
$74.50
IBM SYSTEM x3200 M3 Tower- Intel i3 540 @ 3.07GHz, 4GB, 500GB HHD
$125.00
$16000.00
IBM 8202-E4D Power 720 Server 3.6 GHz 4-Core (EPCK) IBM i V7R2 4x300gb HDD @15k
$596.25
IBM x3650 M4 2x Xeon E5-2670 2.6ghz 16-Core / 64GB / M5110e / 2x PSU
$229.99
IBM 5362 Server System/36 60MB HDD With Manuals
$7700.00