-
Installed Knoppix 3.9 to SATA HDD but it wont boot.
I've got a new PC and I've installed knoppix 3.9 on it. Knoppix detected the SATA HDD which I partitioned using qtparted. I used the ext3 filesystem. The install process wrote the boot record the the MBR. I then tried to boot up without the live cd and I get the the following message: "PXE-E61: Media test failure, check cable"
HD is Western Digital WD1600JDRTL
Motherboard Intel D945GNT
Any ideas how to fix this?
Thanks.
-
Senior Member
registered user
Where & when do you get that message? Does it successfully boot from the HD? Or is this before it boots from the HD?
A PXE message usually indicates that the network card is configured as a boot device and the system is attempting to boot off the network card. Did you change the boot order in the system's BIOS? If so, you may need to readjust the boot order so that it does not attempt to boot off the network card.
-
Originally Posted by
UnderScore
Where & when do you get that message? Does it successfully boot from the HD?
It appears before it boots from the HD. Here is the full message.
PXE-E61: Media test failure, check cable
PXE-M0F: Exiting Intel Boot Agent.
No bootable device -- insert boot disk and press any key
NOTE: I'm doing the install remotly. My helper at the other end skills are limited to inserting/removing a CD and doing a few BIOS things.
I've asked my helper to check the boot device order and put the HD before the CD. The HDD came with a partitioning CD that when run from the booting asked the user to select an OS. Linux was not an option WinXP was selected.
The new error message is
NTLDR is missing
Press CTRL+ALT+DEL to restart
This would guess that its trying to boot from the HDD?? Could this HDD/Motherboard be designed to run windows only?
-
If fixed the problem by reinstalling knoppix. This was a hardware issue and nothing to do with knoppix.
Similar Threads
-
By zaccraven in forum Networking
Replies: 2
Last Post: 01-06-2006, 05:10 PM
-
By Krisbee in forum Hardware & Booting
Replies: 4
Last Post: 06-01-2005, 06:44 PM
-
By Weetabix in forum MS Windows & New to Linux
Replies: 2
Last Post: 12-28-2004, 08:19 PM
-
By proto in forum General Support
Replies: 3
Last Post: 03-17-2004, 11:29 PM
-
By torchZ06 in forum Hdd Install / Debian / Apt
Replies: 2
Last Post: 12-02-2003, 02:47 PM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
HP ProLiant MicroServer Gen8 G8 G2020T 8GB RAM 4x 1TB HDD 4x 3.5" 712318-421
$249.99
1U BareMetal pfsense opnsense Router Firewall DNS Server 6x 10GB Ethernet Ports
$149.00
1U Supermicro Server 10 Bay 2x Intel Xeon 3.3Ghz 8C 128GB RAM 480GB SSD 2x 10GBE
$273.00
Super micro Server
$198.00
HP Proliant MicroServer (Model: HSTNS-5151) NO HARD DRIVES-Power Tested,
$99.99
SuperMicro Server 505-2 Intel Atom 2.4GHz 8GB RAM SYS-5018A-FTN4 1U Rackmount
$202.49
HP 658553-001 Microserver UNTESTED AS IS NO HDD
$99.99
HP ProLiant MicroServer Gen8 Onboard SSD Xeon E3-1220L 16gb RAM (4) 4TB HDs
$250.00
Supermicro 1U Server X9SRI-F Xeon E5-2640 v2 2.5Ghz 16-Cores / 64GB / No HDD
$149.99
SuperMicro CSE-836 16LFF Server X8DTL-i Xeon E5606 2.13GHz CPU 8GB RAM *No HDD
$159.99