-
Problem booting thin-clients
I had a problem booting etherboot clients with Knoppix 12-12-2002. The client would not configure the X server properly. I even tried doing a modprobe for the the video card, but that resulted in errors as well. The weird thing is that the client and the terminal server have the same video card! Any advice?
-
Knoppix with etherboot
If you do a hdinstall then you end up with a normal Debian config.
The terminal server in the Knoppix CD version is a script with some assumptions of your configuration that are not valid when you run it from harddisk.
One solution is to copy the BIG Knoppix file from the CD to the Windows C:\ directory (if you still have that) in the directory knoppix so the image will be in:
C:\knoppix\knoppix
If you boot from floppy (without the CD) then the image will be found and will be used as if it was the CD. Now start terminal server.
After this boot the diskless client and all will run OK, it is a lot quicker this way. I think this is the best solution for classroom project where more than 5 PC's work diskless.
Good luck and thanks to Dave Bechtel that gave the usefull hints.
-
Can you help me with ethernet boot!
! have i host computer with 2 real tek 8139 NIc card and guest with 1 real tek 8139 NIC card! The computers a connected via "crossower" cable! How to set ethernet boot? what options to enter in knoppix and how to configure network kard floppy from www.rom-o-matic.com ? please help!
-
Senior Member
registered user
Re: Knoppix with etherboot
Originally Posted by
Guest NL
If you do a hdinstall then you end up with a normal Debian config.
The terminal server in the Knoppix CD version is a script with some assumptions of your configuration that are not valid when you run it from harddisk.
One solution is to copy the BIG Knoppix file from the CD to the Windows C:\ directory (if you still have that) in the directory knoppix so the image will be in:
C:\knoppix\knoppix
If you boot from floppy (without the CD) then the image will be found and will be used as if it was the CD. Now start terminal server.
After this boot the diskless client and all will run OK, it is a lot quicker this way. I think this is the best solution for classroom project where more than 5 PC's work diskless.
Good luck and thanks to Dave Bechtel that gave the usefull hints.
OK, but what do you setup on the server side? I'm confused, terminal server only works off the CD? What if my clients are running off the CD image (poor man's) and my server is from knoppix-installer (debian version). Can I also use clients from knoppix-installer (knoppix version)?
TIA,
Similar Threads
-
By bkw1a in forum Networking
Replies: 2
Last Post: 07-14-2007, 10:39 PM
-
By Tec in forum Networking
Replies: 2
Last Post: 03-15-2004, 04:56 PM
-
By dave in forum General Support
Replies: 5
Last Post: 01-29-2004, 12:13 AM
-
By MaTh2k in forum Networking
Replies: 0
Last Post: 09-04-2003, 10:28 AM
-
By stonent in forum Networking
Replies: 7
Last Post: 06-11-2003, 05:04 AM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
New Precision DWDM SFP+ 10G 80km Tunable Transceiver 50GHz C-Temp DWDM-SFP10G-C
$90.00
SFP-10G-SR CISCO 10G SR SFP+ C-CLASS TRANSCEIVER 10 PACK
$99.00
ProLabs 10GBase-TX SFP+ RJ-45 Copper Transceiver Module P/N: SFP-10GBASE-T-C NEW
$34.99
Green Label Hologram SFP-10G-T-X 10GBASE-TSFP+ Transceiver Module RJ45 30m
$69.00
CISCO SFP-10G-LR SFP TRANSCEIVER MODULE GBIC 10G 10GB SFP - 1 Year Warranty
$39.99
Brand New Cisco GLC-LH-SMD 1000BASE-LX/LH SFP Module 1310nm 10km SMF LC
$10.99
Genuine Cisco SFP-10G-SR Transceiver Module (10-2415-03)
$5.85
New Sealed Cisco GLC-LH-SMD 1000BASE-LX/LH SFP Transceiver Module *US Shipping*
$9.50
New Cisco w/ Green Hologram SFP-25G-SR-S 25G SFP28 SR 850nm 300m LC MMF Module
$64.39
Lot (10) Dell 0N8TDR 850nm SFP-10G-SR-85C 10Gbs sfp+ FTLX8574D3BNL-FC N8TDR NEW
$68.00