Hi,
I am going through the linuxrc on KNOPPIX and want to understand how it works.
I noticed that the ramdisk(thus the root /) is created on /dev/shm but at the end of the script, it transfer the root system to /dev/ram0 through
echo "0x100" > /proc/sys/kernel/real-root-dev
(where 0x100 is the major-minor device id for /dev/ram0). Is this a kernel feature that is builtin to linux ? I failed to find any node under /dev for /dev/shm which I assumed is not needed like other devices say /dev/hda1...
thanks for any help in advance.
========================================
EDIT: Forget the above, I was dead wrong in understanding the code, now I know better after further reading.
XDHXT DELL PERC H710P 6Gbps 1GB PCI RAID CONTROLLER 0XDHXT
$59.00
IBM LSI SAS9220-8i M1015 46M0861 SAS/SATA PCI-e RAID Controller Both brackets
$139.00
LSI 9305-16i SATA SAS 12Gbs RAID Controller PCIe 3.0 x8 IT-Mode 4* 8643 SATA
$229.99
Lot of 4 - Genuine Dell (62P9H) PERC H710 512MB Mini Blade 6Gbps SAS Raid
$49.99
Inspur LSI 9300-8i Raid Card 12Gbps HBA HDD Controller High Profile IT MODE
$15.98
ORICO Multi Bay RAID Hard Drive Enclosure USB 3.0/ Type-C For 2.5/3.5'' HDD SSDs
$86.99
LSI MegaRAID 9361-8i 12Gb PCIe 8-Port SAS/SATA RAID 1Gb w/BBU/CacheVault/License
$35.96
LSI MegaRAID 9361-8i 12Gbps PCIe 3 x8 SATA SAS 3 8 Port RAID + BBU & CacheVault
$39.00
ACASIS 2.5/3.5 inch 2 Bay SATA USB 3.0 Hard Drive Disk HDD SSD Enclosure 4 RAID
$58.99
Yottamaster 5 Bay RAID Hard Drive Enclosure USB3.1 Type C 2.5"/3.5" SATA HDD SSD
$142.49