Hi,
I am going through the linuxrc on KNOPPIX and want to understand how it works.
I noticed that the ramdisk(thus the root /) is created on /dev/shm but at the end of the script, it transfer the root system to /dev/ram0 through
echo "0x100" > /proc/sys/kernel/real-root-dev
(where 0x100 is the major-minor device id for /dev/ram0). Is this a kernel feature that is builtin to linux ? I failed to find any node under /dev for /dev/shm which I assumed is not needed like other devices say /dev/hda1...
thanks for any help in advance.
========================================
EDIT: Forget the above, I was dead wrong in understanding the code, now I know better after further reading.
HPE BL460c G10 ProLiant Blade | 2x Silver 4110 | 16GB | P204I | 2x300GB 10KRPM
$1419.00
HPE BL460c G10 ProLiant Blade | 2x Silver 4110 | 32GB | P204I | 2x900GB 10KRPM
$1499.00
HPE BL460c G10 ProLiant Blade | 2x Silver 4114 | 256GB | P204I | 2x1.2TB 10KRPM
$2099.00
Dell Poweredge M620 Blade Server 2x E5-2680 v2 2.8ghz 20-Cores / 256gb / H710
$499.99
Dell PowerEdge M620 0F9HJC Blade Server 2*E5-2670 2.60GHz 192GB RAM 2*300GB SAS
$103.99
Dell PowerEdge M640 Blade Server 2x Xeon Gold 5122 3.6GHz, No RAM, READ _
$402.38
HP ProLiant BL460c G9 (Gen9) 2x E5-2670V3 12 Core 3.1GHz No Ram or No Drives
$59.98
Dell PowerEdge M630 Blade Server 1x Xeon E5-2630 v4 CPU / Motherboard P/N 0R10KG
$69.99
Cisco UCS 5108 Blade Server Chassis Enclosure N20-C6508 4x PSU 8x Fans 2x Fabric
$139.99
Dell PowerEdge FX2s CTO Blade 4 Slot 2U Chassis 2x 2000W
$399.00