Firstly, in general the DVD is great and very handy. I just wanted to say I found the Knoppix->Utilities->Hard Disk/CD/DVD Acelleration (sic. acceleration) applet a bit counter-intuitive.
Specifically, to enable DMA on a drive, you have to put a cross in the check-box, and there's no actual indication of the DMA status except this cross.
I had to cross-check with hdparm if a cross indicated enabled or disabled. Could it be themed as a tick, or a description be added to this important-for-performance applet.
Cheers,
Mark
SUN Blade X6250 Server 8GB RAM DUAL PROCESSORS 594-4531-01
$109.99
Dell PowerEdge FX2 FX2S Enclosure - 4x PowerEdge FC640 w/ 8x Gold 6132 112C 1TB
$2699.99
HPE BL460c G10 ProLiant Blade | 2x Silver 4110 | 16GB | P204I | 2x300GB 10KRPM
$1419.00
Dell PowerEdge M620 0F9HJC Blade Server 2*E5-2670 2.60GHz 192GB RAM 2*300GB SAS
$103.99
HPE 863442-B21 ProLiant BL460c G10 Blade (2) Intel Xeon Silver CPUs NO HD/NO RAM
$319.00
Dell PowerEdge M640 Blade Server 2x Xeon Gold 5122 3.6GHz, No RAM, READ _
$402.38
HP ProLiant BL460c G9 (Gen9) 2x E5-2670V3 12 Core 3.1GHz No Ram or No Drives
$59.98
Dell PowerEdge M1000E 16x Slots Blade Server W/ 8x Blade Server Blank Filler
$589.00
Cisco UCS 5108 Blade Server Chassis Enclosure N20-C6508 4x PSU 8x Fans 2x Fabric
$139.99
Dell PowerEdge FX2s CTO Blade 4 Slot 2U Chassis 2x 2000W
$399.00