Firstly, in general the DVD is great and very handy. I just wanted to say I found the Knoppix->Utilities->Hard Disk/CD/DVD Acelleration (sic. acceleration) applet a bit counter-intuitive.
Specifically, to enable DMA on a drive, you have to put a cross in the check-box, and there's no actual indication of the DMA status except this cross.
I had to cross-check with hdparm if a cross indicated enabled or disabled. Could it be themed as a tick, or a description be added to this important-for-performance applet.
Cheers,
Mark
Dell PowerEdge FX2 FX2S Enclosure - 4x PowerEdge FC640 w/ 8x Gold 6132 112C 1TB
$2699.99
Dell PowerEdge FX2 FX2S Enclosure - 4x PowerEdge FC640 w/ 8x Gold 6134 64C 1TB
$3299.99
DELL M630 BLADE SERVER x2 XEON E5-2660V3 @ 2.6GH H730 PERC HDD CADDIES 16GB FC
$50.00
Dell PowerEdge M620 Blade Server
$39.99
UCSB-B480-M5, CISCO UCSB-B480-M5 V05 UCS B480 M5 BLADE SERVER W UCSB-MLOM-40G-03
$950.00
Cisco UCSB-B200-M4 Blade Server Chassis 73-15862-06 with back No RAM and CPU
$109.00
2 x HP ProLiant BL460c (447707-B21) Blade Servers No RAM No HDD
$30.00
Lot of 25 Cisco UCS B200 M4 Blade Servers, 2x2680 V3, 40GbE, No Ram No HDD
$749.99
Cisco UCS 5108 Blade Server Chassis Enclosure 8x B200 M4 16x E5-2640v3 128gb
$599.99
UCSB-B200-M4 UCS Blade Server, 2x E5-2667 V3, 256GB RAM DDR4, 2x 300GB Drives
$299.99