Hi,
I think I definitely need help....
I'm trying to get Knoppix working on my new laptop a Travelmate 8103WLMi.
I'm able to boot Knoppix with the following cheat-codes:

noapic acpi=off pci=biosirq

Knoppix boots (after waiting a couple of minutes when the green bar progress looking for hardware) but:
I'm unable to start the wireless card (Intel PRO Wireless 2915ABG) Most important: I neet this to get to Internet (I use the home desktop as gateway with Ad-Hoc WLAN - working great under Windows XP)
I'm unable to get the LAN Working (Broadcom NetXtreme Gigabit Ethernet)
Sound doesn't work
Image on screen is somewhat stretched (the Knoppix screen resolutions is 1024x768 should be 1280x768 to get a correct aspect ratio)

Thanking in advance, I enclose some (hopefully useful) info:

dmesg output:
--------cut here
Linux version 2.6.11 (root@Knoppix) (gcc-Version 3.3.5 (Debian 1:3.3.5-12)) #3 SMP Mon May 2 00:19:56 CEST 2005
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000ce000 - 00000000000d0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001fe80000 (usable)
BIOS-e820: 000000001fe80000 - 000000001fe89000 (ACPI data)
BIOS-e820: 000000001fe89000 - 000000001ff00000 (ACPI NVS)
BIOS-e820: 000000001ff00000 - 0000000020000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0006000 (reserved)
BIOS-e820: 00000000f0008000 - 00000000f000c000 (reserved)
BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved)
BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
510MB LOWMEM available.
On node 0 totalpages: 130688
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 126592 pages, LIFO batch:16
HighMem zone: 0 pages, LIFO batch:1
DMI present.
Allocating PCI resources starting at 20000000 (gap: 20000000:c0000000)
Built 1 zonelists
Kernel command line: ramdisk_size=100000 init=/etc/init lang=it apm=power-off vga=791 nomce quiet bootfrom=/dev/sda2/boot/knoppix382/*.iso acpi=off pci=biosirq noapic
__iounmap: bad address c00fffd9
Found and enabled local APIC!
mapped APIC to ffffd000 (fee00000)
Initializing CPU#0
PID hash table entries: 2048 (order: 11, 32768 bytes)
Detected 1862.100 MHz processor.
Using tsc for high-res timesource
Console: colour dummy device 80x25
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 511424k/522752k available (1846k kernel code, 10716k reserved, 943k data, 292k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 3661.82 BogoMIPS (lpj=1830912)
Security Framework v1.0.0 initialized
SELinux: Disabled at boot.
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: afe9fbff 00100000 00000000 00000000 00000180 00000000 00000000
CPU: After vendor identify, caps: afe9fbff 00100000 00000000 00000000 00000180 00000000 00000000
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: After all inits, caps: afe9fbff 00100000 00000000 00000040 00000180 00000000 00000000
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
Checking for popad bug... OK.
CPU0: Intel(R) Pentium(R) M processor 1.86GHz stepping 08
per-CPU timeslice cutoff: 5850.27 usecs.
task migration cache decay timeout: 6 msecs.
SMP motherboard not detected.
Brought up 1 CPUs
CPU0 attaching sched-domain:
domain 0: span 00000001
groups: 00000001
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
Freeing initrd memory: 1805k freed
NET: Registered protocol family 16
EISA bus registered
PCI: PCI BIOS revision 2.10 entry at 0xfd6ce, last bus=8
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20050211
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI: disabled
PnPBIOS: Scanning system for PnP BIOS support...
PnPBIOS: Found PnP BIOS installation structure at 0xc00f6900
PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xb0c2, dseg 0x400
PnPBIOS: 20 nodes reported by PnP BIOS; 20 recorded by driver
SCSI subsystem initialized
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.2
PCI: Transparent bridge - 0000:00:1e.0
PCI: Using BIOS Interrupt Routing Table
PCI: Using BIOS for IRQ routing
PCI: IRQ 0 for device 0000:00:01.0 doesn't match PIRQ mask - try pci=usepirqmask
PCI: IRQ 0 for device 0000:00:1c.0 doesn't match PIRQ mask - try pci=usepirqmask
PCI: IRQ 0 for device 0000:00:1c.1 doesn't match PIRQ mask - try pci=usepirqmask
PCI: IRQ 0 for device 0000:00:1c.2 doesn't match PIRQ mask - try pci=usepirqmask
PCI: IRQ 0 for device 0000:00:1f.2 doesn't match PIRQ mask - try pci=usepirqmask
pnp: 00:00: ioport range 0x4d0-0x4d1 has been reserved
pnp: 00:00: ioport range 0x1000-0x105f has been reserved
pnp: 00:00: ioport range 0x1060-0x107f has been reserved
pnp: 00:00: ioport range 0x1180-0x11bf has been reserved
pnp: 00:0a: ioport range 0xfe00-0xfe01 has been reserved
audit: initializing netlink socket (disabled)
audit(1124022143.493:0): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
PCI: IRQ 0 for device 0000:00:01.0 doesn't match PIRQ mask - try pci=usepirqmask
PCI: setting IRQ 10 as level-triggered
PCI: Assigned IRQ 10 for device 0000:00:01.0
PCI: Sharing IRQ 10 with 0000:00:1b.0
PCI: Sharing IRQ 10 with 0000:00:1c.1
PCI: Sharing IRQ 10 with 0000:00:1d.3
PCI: Sharing IRQ 10 with 0000:01:00.0
PCI: Setting latency timer of device 0000:00:01.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[pcie00]
PCI: IRQ 0 for device 0000:00:1c.0 doesn't match PIRQ mask - try pci=usepirqmask
PCI: Assigned IRQ 10 for device 0000:00:1c.0
PCI: Setting latency timer of device 0000:00:1c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[pcie00]
Allocate Port Service[pcie02]
PCI: Assigned IRQ 10 for device 0000:00:1c.1
PCI: Sharing IRQ 10 with 0000:00:01.0
PCI: Sharing IRQ 10 with 0000:00:1b.0
PCI: Sharing IRQ 10 with 0000:00:1d.3
PCI: Sharing IRQ 10 with 0000:01:00.0
PCI: Setting latency timer of device 0000:00:1c.1 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[pcie00]
Allocate Port Service[pcie02]
PCI: IRQ 0 for device 0000:00:1c.2 doesn't match PIRQ mask - try pci=usepirqmask
PCI: setting IRQ 11 as level-triggered
PCI: Assigned IRQ 11 for device 0000:00:1c.2
PCI: Sharing IRQ 11 with 0000:00:1d.2
PCI: Setting latency timer of device 0000:00:1c.2 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[pcie00]
Allocate Port Service[pcie02]
vesafb: framebuffer at 0xd0000000, mapped to 0xe0880000, using 3072k, total 16384k
vesafb: mode is 1024x768x16, linelength=2048, pages=9
vesafb: protected mode interface info at c000:a8fe
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
floppy0: no floppy controllers found
RAMDISK driver initialized: 16 RAM disks of 100000K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ide0: I/O resource 0x1F0-0x1F7 not free.
ide0: ports already in use, skipping probe
Probing IDE interface ide1...
hdc: HL-DT-ST DVDRAM GMA-4080N, ATAPI CD/DVD-ROM drive
Probing IDE interface ide2...
Probing IDE interface ide3...
Probing IDE interface ide4...
Probing IDE interface ide5...
ide1 at 0x170-0x177,0x376 on irq 15
hdc: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache
Uniform CD-ROM driver Revision: 3.20
libata version 1.10 loaded.
ahci version 1.00
PCI: IRQ 0 for device 0000:00:1f.2 doesn't match PIRQ mask - try pci=usepirqmask
PCI: Assigned IRQ 11 for device 0000:00:1f.2
PCI: Sharing IRQ 11 with 0000:00:1d.1
PCI: Sharing IRQ 11 with 0000:00:1f.3
ahci: probe of 0000:00:1f.2 failed with error -12
ata_piix version 1.03
PCI: Assigned IRQ 11 for device 0000:00:1f.2
PCI: Sharing IRQ 11 with 0000:00:1d.1
PCI: Sharing IRQ 11 with 0000:00:1f.3
ata: 0x170 IDE port busy
PCI: Setting latency timer of device 0000:00:1f.2 to 64
ata1: SATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0x18A0 irq 14
ata1: dev 0 cfg 49:0f00 82:746b 83:7fe8 84:4023 85:f469 86:3d48 87:4023 88:203f
ata1: dev 0 ATA, max UDMA/100, 156301488 sectors: lba48
ata1: dev 0 configured for UDMA/100
scsi0 : ata_piix
Vendor: ATA Model: IC25N080ATMR04-0 Rev: MO4O
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
SCSI device sda: drive cache: write back
SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
SCSI device sda: drive cache: write back
sda: sda1 sda2 sda3 sda4
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard on isa0060/serio0
Synaptics Touchpad, model: 1
Firmware: 5.9
Sensor: 18
new absolute packet format
Touchpad has extended capability bits
-> 4 multi-buttons, i.e. besides standard buttons
-> multifinger detection
-> palm detection
input: SynPS/2 Synaptics TouchPad on isa0060/serio4
EISA: Probing bus 0 at eisa0
Cannot allocate resource for EISA slot 1
Cannot allocate resource for EISA slot 2
EISA: Detected 0 cards.
NET: Registered protocol family 2
IP: routing cache hash table of 2048 buckets, 32Kbytes
TCP established hash table entries: 16384 (order: 6, 262144 bytes)
TCP bind hash table entries: 16384 (order: 5, 196608 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
NET: Registered protocol family 1
NET: Registered protocol family 15
RAMDISK: Compressed image found at block 0
EXT2-fs warning: checktime reached, running e2fsck is recommended
VFS: Mounted root (ext2 filesystem).
seagate: ST0x/TMC-8xx not detected.
Failed initialization of WD-7000 SCSI card!
usbcore: registered new driver usbfs
usbcore: registered new driver hub
ehci_hcd 0000:00:1d.7: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: irq 11, pci mem 0xc8004000
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
USB Universal Host Controller Interface driver v2.2
uhci_hcd 0000:00:1d.0: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: irq 11, io base 0x1800
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
PCI: Assigned IRQ 11 for device 0000:00:1d.1
PCI: Sharing IRQ 11 with 0000:00:1f.2
PCI: Sharing IRQ 11 with 0000:00:1f.3
uhci_hcd 0000:00:1d.1: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: irq 11, io base 0x1820
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
PCI: Assigned IRQ 11 for device 0000:00:1d.2
PCI: Sharing IRQ 11 with 0000:00:1c.2
uhci_hcd 0000:00:1d.2: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: irq 11, io base 0x1840
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
PCI: Assigned IRQ 10 for device 0000:00:1d.3
PCI: Sharing IRQ 10 with 0000:00:01.0
PCI: Sharing IRQ 10 with 0000:00:1b.0
PCI: Sharing IRQ 10 with 0000:00:1c.1
PCI: Sharing IRQ 10 with 0000:01:00.0
uhci_hcd 0000:00:1d.3: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: irq 10, io base 0x1860
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ub: sizeof ub_scsi_cmd 64 ub_dev 2504
usbcore: registered new driver ub
Initializing USB Mass Storage driver...
usb 2-2: new low speed USB device using uhci_hcd and address 2
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
ieee1394: Initialized config rom entry `ip1394'
ohci1394: $Rev: 1223 $ Ben Collins <bcollins@debian.org>
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[11] MMIO=[c8215000-c82157ff] Max Packet=[2048]
sbp2: $Rev: 1219 $ Ben Collins <bcollins@debian.org>
ieee1394: sbp2: Driver forced to serialize I/O (serialize_io = 1)
usb 5-2: new full speed USB device using uhci_hcd and address 2
ieee1394: Host added: ID:BUS[0-00:1023] GUID[00c09f000044b80f]
NTFS driver 2.1.22 [Flags: R/W MODULE].
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
Unable to identify CD-ROM format.
VFS: Can't find an ext2 filesystem on dev sda1.
Unable to identify CD-ROM format.
VFS: Can't find an ext2 filesystem on dev sda2.
FAT: bogus number of reserved sectors
VFS: Can't find a valid FAT filesystem on dev sda2.
NTFS-fs warning (device sda2): parse_options(): Option iocharset is deprecated. Please use option nls=<charsetname> in the future.
NTFS volume version 3.1.
Unable to identify CD-ROM format.
VFS: Can't find an ext2 filesystem on dev sda3.
FAT: bogus number of reserved sectors
VFS: Can't find a valid FAT filesystem on dev sda3.
NTFS-fs warning (device sda3): parse_options(): Option iocharset is deprecated. Please use option nls=<charsetname> in the future.
NTFS volume version 3.1.
Unable to identify CD-ROM format.
VFS: Can't find an ext2 filesystem on dev sda4.
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
loop: loaded (max 8 devices)
Unable to identify CD-ROM format.
VFS: Can't find an ext2 filesystem on dev sda2.
NTFS-fs warning (device sda2): parse_options(): Option iocharset is deprecated. Please use option nls=<charsetname> in the future.
NTFS volume version 3.1.
VFS: Can't find an ext2 filesystem on dev loop0.
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
cloop: Initializing cloop v2.02
cloop: loaded (max 8 devices)
cloop: /cdrom2/KNOPPIX/KNOPPIX: 30729 blocks, 65536 bytes/block, largest block is 65552 bytes.
ISO 9660 Extensions: RRIP_1991A
Registering unionfs version $Id: main.c,v 1.85 2005/03/14 22:19:49 dquigley Exp $
Freeing unused kernel memory: 292k freed
Generic RTC Driver v1.07
apm: BIOS not found.
Linux Kernel Card Services
options: [pci] [cardbus] [pm]
Yenta: CardBus bridge found at 0000:06:09.0 [1025:0070]
Yenta O2: res at 0x94/0xD4: ea/00
Yenta O2: enabling read prefetch/write burst
irq 10: nobody cared!
[<c01374de>] __report_bad_irq+0x22/0x78
[<c013759c>] note_interrupt+0x4c/0x78
[<c01370f4>] __do_IRQ+0x11c/0x124
[<c01052d1>] do_IRQ+0x19/0x24
[<c0103d9a>] common_interrupt+0x1a/0x20
[<c011fa51>] __do_softirq+0x49/0xc8
[<c011fafd>] do_softirq+0x2d/0x30
[<c011fbb1>] irq_exit+0x39/0x3c
[<c01052d6>] do_IRQ+0x1e/0x24
[<c0103d9a>] common_interrupt+0x1a/0x20
[<c010c8ae>] delay_tsc+0xe/0x18
[<c01bb924>] __delay+0xc/0x10
[<e0d33c72>] yenta_probe_irq+0xe6/0x118 [yenta_socket]
[<e0d32780>] yenta_interrupt+0x0/0x2c [yenta_socket]
[<c01374a1>] request_irq+0x75/0x90
[<e0d33df4>] yenta_get_socket_capabilities+0x2c/0x50 [yenta_socket]
[<e0d34091>] yenta_probe+0x185/0x208 [yenta_socket]
[<c01c229a>] pci_device_probe_static+0x32/0x44
[<c01c22d3>] __pci_device_probe+0x27/0x3c
[<c01c2304>] pci_device_probe+0x1c/0x38
[<c020bf88>] driver_probe_device+0x24/0x5c
[<c020c093>] driver_attach+0x4f/0x74
[<c020c414>] bus_add_driver+0x64/0x84
[<c020c7cb>] driver_register+0x3b/0x40
[<c01c24e5>] pci_register_driver+0x71/0x8c
[<e0bc500a>] yenta_socket_init+0xa/0xc [yenta_socket]
[<c013146e>] sys_init_module+0x15e/0x208
[<c010342b>] syscall_call+0x7/0xb
handlers:
[<e083110c>] (usb_hcd_irq+0x0/0x54 [usbcore])
Disabling IRQ #10
Yenta: ISA IRQ mask 0x02b8, PCI irq 11
Socket status: 30000006
Yenta: CardBus bridge found at 0000:06:09.1 [1025:0070]
Yenta: ISA IRQ mask 0x02b8, PCI irq 10
Socket status: 30000006
PCI: Enabling device 0000:06:09.3 (0080 -> 0082)
PCI: No IRQ known for interrupt pin A of device 0000:06:09.3.
Yenta: CardBus bridge found at 0000:06:09.3 [1025:0070]
Yenta: ISA IRQ mask 0x02b8, PCI irq 0
Socket status: 30000410
cs: IO port probe 0xc00-0xcff: clean.
cs: IO port probe 0xc00-0xcff: clean.
cs: IO port probe 0xc00-0xcff: clean.
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0x800-0x80f: clean.
cs: IO port probe 0x800-0x80f: clean.
cs: IO port probe 0x800-0x80f: clean.
cs: IO port probe 0x100-0x4ff: excluding 0x2f8-0x2ff 0x3f0-0x3f7
cs: IO port probe 0x100-0x4ff: excluding 0x2f8-0x2ff 0x3f0-0x3f7
cs: IO port probe 0x100-0x4ff: excluding 0x2f8-0x2ff 0x3f0-0x3f7
cs: IO port probe 0xa00-0xaff: clean.
cs: IO port probe 0xa00-0xaff: clean.
cs: IO port probe 0xa00-0xaff: clean.
cs: memory probe 0xa0000000-0xa0ffffff: clean.
usbcore: registered new driver hiddev
input: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:1d.0-2
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
ts: Compaq touchscreen protocol output
usb 5-2: hwsetup timed out on ep0in
usb 5-2: hwsetup timed out on ep0in
usb 5-2: string descriptor 0 read error: -110
usb 5-2: hwsetup timed out on ep0in
usb 5-2: hwsetup timed out on ep0in
usb 5-2: string descriptor 0 read error: -110
usb 5-2: hwsetup timed out on ep0in
usb 5-2: hwsetup timed out on ep0in
usb 5-2: string descriptor 0 read error: -110
usb 5-2: hwsetup timed out on ep0in
usb 5-2: hwsetup timed out on ep0in
usb 5-2: string descriptor 0 read error: -110
usb 5-2: hwsetup timed out on ep0in
usb 5-2: hwsetup timed out on ep0in
usb 5-2: string descriptor 0 read error: -110
usb 5-2: hwsetup timed out on ep0in
usb 5-2: hwsetup timed out on ep0in
usb 5-2: string descriptor 0 read error: -110
usb 5-2: hwsetup timed out on ep0in
usb 5-2: hwsetup timed out on ep0in
usb 5-2: string descriptor 0 read error: -110
usb 5-2: hwsetup timed out on ep0in
usb 5-2: hwsetup timed out on ep0in
usb 5-2: string descriptor 0 read error: -110
usb 5-2: hwsetup timed out on ep0in
usb 5-2: hwsetup timed out on ep0in
usb 5-2: string descriptor 0 read error: -110
Serial: 8250/16550 driver $Revision: 1.90 $ 14 ports, IRQ sharing disabled
ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A
pnp: Device 00:15 activated.
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378 (0x77, irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
ieee80211_crypt: registered algorithm 'NULL'
ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.0.1
ipw2200: Copyright(c) 2003-2004 Intel Corporation
ipw2200: Detected Intel PRO/Wireless 2915ABG Network Connection
ipw2200: Radio Frequency Kill Switch is On:
Kill switch must be turned off for wireless networking to work.
hw_random: cannot enable RNG, aborting
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected an Intel 915GM Chipset.
agpgart: Maximum main memory to use for agp memory: 438M
agpgart: AGP aperture is 256M @ 0x0
tg3.c:v3.23 (February 15, 2005)
eth1: Tigon3 [partno(BCM95788A50) rev 3003 PHY(5705)] (PCI:33MHz:32-bit) 10/100/1000BaseT Ethernet 00:c0:9f:84:79:77
eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[0] TSOcap[1]
NTFS volume version 3.1.
NET: Registered protocol family 17
apm: BIOS not found.
-------------- cut here

lspci output
------------------ cut here
0000:00:00.0 Host bridge: Intel Corp. Mobile Memory Controller Hub (rev 03)
Subsystem: Acer Incorporated [ALI]: Unknown device 0070
Flags: bus master, fast devsel, latency 0
Capabilities: [e0] #09 [2109]

0000:00:01.0 PCI bridge: Intel Corp. Mobile Memory Controller Hub PCI Express Port (rev 03) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: c8100000-c81fffff
Prefetchable memory behind bridge: d0000000-d7ffffff
Capabilities: [88] #0d [0000]
Capabilities: [80] Power Management version 2
Capabilities: [90] Message Signalled Interrupts: 64bit- Queue=0/0 Enable-
Capabilities: [a0] #10 [0141]

0000:00:1b.0 0403: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller (rev 04)
Subsystem: Acer Incorporated [ALI]: Unknown device 0070
Flags: bus master, fast devsel, latency 0, IRQ 10
Memory at c8000000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Capabilities: [60] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable-
Capabilities: [70] #10 [0091]

0000:00:1c.0 PCI bridge: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 (rev 04) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=09, subordinate=09, sec-latency=0
Capabilities: [40] #10 [0141]
Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable-
Capabilities: [90] #0d [0000]
Capabilities: [a0] Power Management version 2

0000:00:1c.1 PCI bridge: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 2 (rev 04) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=0a, subordinate=0a, sec-latency=0
Capabilities: [40] #10 [0141]
Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable-
Capabilities: [90] #0d [0000]
Capabilities: [a0] Power Management version 2

0000:00:1c.2 PCI bridge: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 3 (rev 04) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=02, subordinate=04, sec-latency=0
Capabilities: [40] #10 [0141]
Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable-
Capabilities: [90] #0d [0000]
Capabilities: [a0] Power Management version 2

0000:00:1d.0 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 04) (prog-if 00 [UHCI])
Subsystem: Acer Incorporated [ALI]: Unknown device 0070
Flags: bus master, medium devsel, latency 0, IRQ 11
I/O ports at 1800 [size=32]

0000:00:1d.1 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 04) (prog-if 00 [UHCI])
Subsystem: Acer Incorporated [ALI]: Unknown device 0070
Flags: bus master, medium devsel, latency 0, IRQ 11
I/O ports at 1820 [size=32]

0000:00:1d.2 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 04) (prog-if 00 [UHCI])
Subsystem: Acer Incorporated [ALI]: Unknown device 0070
Flags: bus master, medium devsel, latency 0, IRQ 11
I/O ports at 1840 [size=32]

0000:00:1d.3 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 04) (prog-if 00 [UHCI])
Subsystem: Acer Incorporated [ALI]: Unknown device 0070
Flags: bus master, medium devsel, latency 0, IRQ 10
I/O ports at 1860 [size=32]

0000:00:1d.7 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 04) (prog-if 20 [EHCI])
Subsystem: Acer Incorporated [ALI]: Unknown device 0070
Flags: bus master, medium devsel, latency 0, IRQ 11
Memory at c8004000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Capabilities: [58] #0a [20a0]

0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev d4) (prog-if 01 [Subtractive decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=06, subordinate=08, sec-latency=32
Memory behind bridge: c8200000-c82fffff
Capabilities: [50] #0d [0000]

0000:00:1f.0 ISA bridge: Intel Corp. 82801FBM (ICH6M) LPC Interface Bridge (rev 04)
Subsystem: Acer Incorporated [ALI]: Unknown device 0070
Flags: bus master, medium devsel, latency 0

0000:00:1f.2 IDE interface: Intel Corp. 82801FBM (ICH6M) SATA Controller (rev 04) (prog-if 80 [Master])
Subsystem: Acer Incorporated [ALI]: Unknown device 0070
Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 11
I/O ports at <unassigned>
I/O ports at <unassigned>
I/O ports at <unassigned>
I/O ports at <unassigned>
I/O ports at 18a0 [size=16]
Capabilities: [70] Power Management version 2

0000:00:1f.3 SMBus: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller (rev 04)
Subsystem: Acer Incorporated [ALI]: Unknown device 0070
Flags: medium devsel, IRQ 11
I/O ports at 18e0 [size=32]

0000:01:00.0 VGA compatible controller: ATI Technologies Inc: Unknown device 5653 (prog-if 00 [VGA])
Subsystem: Acer Incorporated [ALI]: Unknown device 0070
Flags: bus master, fast devsel, latency 0, IRQ 10
Memory at d0000000 (32-bit, prefetchable) [size=128M]
I/O ports at 2000 [size=256]
Memory at c8100000 (32-bit, non-prefetchable) [size=64K]
Capabilities: [50] Power Management version 2
Capabilities: [58] #10 [0001]
Capabilities: [80] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable-

0000:06:03.0 Network controller: Intel Corp.: Unknown device 4223 (rev 05)
Subsystem: Intel Corp.: Unknown device 1001
Flags: bus master, medium devsel, latency 32, IRQ 11
Memory at c8214000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [dc] Power Management version 2

0000:06:06.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5788 Gigabit Ethernet (rev 03)
Subsystem: Acer Incorporated [ALI]: Unknown device 0070
Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 10
Memory at c8200000 (32-bit, non-prefetchable) [size=64K]
Capabilities: [48] Power Management version 2
Capabilities: [50] Vital Product Data
Capabilities: [58] Message Signalled Interrupts: 64bit+ Queue=0/3 Enable-

0000:06:07.0 FireWire (IEEE 1394): Texas Instruments TSB43AB21 IEEE-1394a-2000 Controller (PHY/Link) (prog-if 10 [OHCI])
Subsystem: Acer Incorporated [ALI]: Unknown device 0070
Flags: bus master, medium devsel, latency 32, IRQ 11
Memory at c8215000 (32-bit, non-prefetchable) [size=2K]
Memory at c8210000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [44] Power Management version 2

0000:06:09.0 CardBus bridge: O2 Micro, Inc. OZ711M3 SmartCardBus MultiMediaBay Controller
Subsystem: Acer Incorporated [ALI]: Unknown device 0070
Flags: bus master, stepping, slow devsel, latency 168, IRQ 11
Memory at c8216000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=06, secondary=07, subordinate=0a, sec-latency=176
Memory window 0: 20400000-207ff000 (prefetchable)
Memory window 1: 20800000-20bff000
I/O window 0: 00004000-000040ff
I/O window 1: 00004400-000044ff
16-bit legacy interface ports at 0001

0000:06:09.1 CardBus bridge: O2 Micro, Inc. OZ711M3 SmartCardBus MultiMediaBay Controller
Subsystem: Acer Incorporated [ALI]: Unknown device 0070
Flags: bus master, stepping, slow devsel, latency 168, IRQ 10
Memory at c8217000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=06, secondary=0b, subordinate=0e, sec-latency=176
Memory window 0: 20c00000-20fff000 (prefetchable)
Memory window 1: 21000000-213ff000
I/O window 0: 00004800-000048ff
I/O window 1: 00004c00-00004cff
16-bit legacy interface ports at 0001

0000:06:09.2 System peripheral: O2 Micro, Inc. OZ711Mx MultiMediaBay Accelerator
Subsystem: Acer Incorporated [ALI]: Unknown device 0070
Flags: slow devsel, IRQ 11
Memory at c8218000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [a0] Power Management version 2

0000:06:09.3 CardBus bridge: O2 Micro, Inc. OZ711M3 SmartCardBus MultiMediaBay Controller
Subsystem: Acer Incorporated [ALI]: Unknown device 0070
Flags: bus master, stepping, slow devsel, latency 168
Memory at 20000000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=06, secondary=0f, subordinate=12, sec-latency=176
Memory window 0: 21400000-217ff000 (prefetchable)
Memory window 1: 21800000-21bff000
I/O window 0: 00005000-000050ff
I/O window 1: 00005400-000054ff
16-bit legacy interface ports at 0001
------------ cut here

lsmod output
------------- cut here
Module Size Used by
autofs4 18820 1
af_packet 20104 0
tg3 82180 0
intel_agp 22044 1
agpgart 30512 1 intel_agp
i2c_i801 11276 0
i2c_core 21248 1 i2c_i801
ipw2200 127592 0
firmware_class 11264 1 ipw2200
ieee80211 39076 1 ipw2200
ieee80211_crypt 8648 2 ipw2200,ieee80211
parport_pc 38596 0
parport 33480 1 parport_pc
8250 41692 0
serial_core 21120 1 8250
tsdev 9664 0
evdev 11008 0
usbhid 42176 0
pcmcia 21776 6
yenta_socket 21896 4
rsrc_nonstatic 12160 1 yenta_socket
pcmcia_core 42272 3 pcmcia,yenta_socket,rsrc_nonstatic
genrtc 12060 0
unionfs 830612 1
cloop 18848 1
loop 57356 2
nls_euc_jp 9092 1
nls_cp932 85120 1
ntfs 163728 1
sbp2 24456 0
ohci1394 33028 0
ieee1394 300600 2 sbp2,ohci1394
usb_storage 63296 0
ub 18332 0
ohci_hcd 21896 0
uhci_hcd 31376 0
ehci_hcd 31752 0
usbcore 101496 7 usbhid,usb_storage,ub,ohci_hcd,uhci_hcd,ehci_hcd
-------- cut here