switched to Kanotix(sorry,I'm in a hurry!)
Problem solved:
ln -b /dev/sttyUSB0 /dev/modem
Managed to install Knoppix 3.6 on my toshiba laptop.
1.Created a 3gb ext2 partition using Partition Magic
2.Booted knoppix 3.6 and installed it on the partittion created above.
3.managed to turn on sound-although not as loud as in xp but I'll see into that later.
4.managed to make the modem work using slmodem-2.9.9epre2
Here are the problems encountered so far:
1.usb thumb drive.
I used USB view and the usb drive is recognized as a samsung mighty drive.My question is how do I mount this drive?I do not know the /dev/xxxx.Any body know how?
2.USB to serial adapter.
again seen in USB View as prolific usb to serial controller.HOw do I use it?
switched to Kanotix(sorry,I'm in a hurry!)
Problem solved:
ln -b /dev/sttyUSB0 /dev/modem
$169.99
HP PROLIANT MICROSERVER MICRO SERVER HSTNS-5151 T4 Used.
$45.00
HP ProLiant Xeon E3-1220L V2 16 GB RAM 2.30 GHz MicroServer Gen8 NO DRIVES
$174.99
HPE PROLIANT MICROSERVER GEN10 PLUS MICRO TOWER SERVER - USED
$550.00
SuperMicro Server 505-2 Intel Atom 2.4GHz 8GB RAM SYS-5018A-FTN4 1U Rackmount
$202.49
HP ProLiant HSTNS-5151 Micro Server 8GB RAM No Drives/Key/Caddies *READ*
$94.99
HPE Proliant Microserver Gen10 X3421 Perf AMS, P03698-S01, 16GB Ram
$299.00
Supermicro Server Tower Xeon BOOTS E5-2620 v4 2.10GHz 64GB RAM NO HDD NO OS
$199.99
1U Supermicro Server 10 Bay 2x Intel Xeon 3.3Ghz 8C 128GB RAM 480GB SSD 2x 10GBE
$297.00
SUPERMICRO CSE-512 AMD Opteron Processor 6128, 32GB DDR3 RAM NO HDD
$90.00