I'll have to double check, but I think I did try 3.7 and 3.8.1 already with the same result!
Thanx,
AJG
What versions have you tried? There are some strange USB problems with 3.9, I don't know if they are impacting you or not. I would try both a 3.7 and a 3.8.x version if you have them available.Originally Posted by A. Jorge Garcia
---
Verifying of md5 checksum and burning a CD at slow speed are important.
I'll have to double check, but I think I did try 3.7 and 3.8.1 already with the same result!
Thanx,
AJG
Hi all,
The cheat codes do not help. As docbill had mentioned the CD ROM is not locked. Once the auto detect progress bar ( the green one ) reaches 100%, the system sort of hangs and the installation stalls. At this point of time the system is trying to read from the floppy drive. The LED for the floppy drive turns green and stays that way. The CD ROM at this point is not in use. Any help would be great
The installation? What installation? Are you trying to "install" Knoppix or just boot it?Originally Posted by The Saint
I meant the booting. Will someone help me with the problem rather...
I don't have version 3.7. Version 3.8.1 and version 3.9 both fail in the same manner. Versions 3.4 and 3.6 both boot normally.Originally Posted by Harry Kuhman
Bill
What cheatcodes have you tried?Originally Posted by The Saint
What version of Knoppix are you using?
Describe your system:
- CPU speed
- amount of RAM
- size of hard disk
- type of CD-ROM (ATA, SATA, USB, etc.)
- any existing OS
Regards,
- Robert
http://www.cwelug.org
So mnay question but cant see even a single useful answer. Anyways
>>What cheatcodes have you tried?
I tried all the cheat codes mentioned in this thread & forums.
>>What version of Knoppix are you using?
As mentioned above I am using 3.9
Describe your system:
- CPU speed: P4 2.4 Ghz
- amount of RAM: 512 MB
- size of hard disk: 80 GB
- type of CD-ROM (ATA, SATA, USB, etc.): SATA
- any existing OS: Windows XP SP 2
OK. Then what happenend when you tried each of the boot options mentioned in the Tips&Trick section of the cheatcodes page? In addition what happenend when you booted with boot: failsafe nohwsetup 1? Did Knoppix drop you into a text prompt?Originally Posted by The Saint
Regards,
- Robert
http://www.cwelug.org
[quote="rwcitek"]What cheatcodes have you tried? : -b, expert, bootfromOriginally Posted by The Saint
What version of Knoppix are you using? 3.8.1, 3.9 have the problem. 3.4 and 3.6 don't
Describe your system:
- CPU speed: 450 MHz PII
- amount of RAM: 128 MB
- size of hard disk: 13.6 GB
- type of CD-ROM (ATA, SATA, USB, etc.): IDE CDROM. Note in the case where I tried the expert, the ISO image was on an ext3 filesytem. I want to try it on an extended 2 filesystem, but ubuntu does not provide any tools for resizing partitions without erasing data. I will see if I can download a program to try that today...
- any existing OS: First time I tried with Windows XP already installed. Second time with no OS installed. Everytime after with ubuntu linux installed.
Dell PowerEdge R620 Server 2x E5-2660 v1 2.2GHz 16 Cores 256GB RAM 2x 300GB HDD
$89.99
Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 128GB RAM No HDD
$389.99
Dell PowerEdge R720 Server - 2x8c CPU,256Gb RAM, 128Gb SSD/3x900Gb SAS, Proxmox
$340.00
DELL PowerEdge R730 Server 2x E5-2680v4 2.4GHz =28 Cores 32GB H730 4xRJ45
$284.00
DELL POWEREDGE T430 SERVER W/ DUAL XEON E5-2609 CPU & 16GB MEMORY
$329.00
CTO Dell PowerEdge R630 Server, 2x Xeon E5-2620V4, 64GB- 512GB RAM, 480GB SSDs
$246.67
Dell PowerEdge R620 Server 2x E5-2650 V2 = 16 Cores H710P 128GB RAM 2x 600GB SAS
$274.99
Dell PowerEdge R730XD Server (2x) E5-2630 V3 2.4Ghz 128GB (8x)1TB(2x)300GB HDD
$220.00
DELL PowerEdge R630 8SFF Server 2x E5-2690v4 2.6GHz =28 Cores 256GB H730 4xRJ45
$600.00