hi all
A week ago i just got a new sata disk, so i have installed version 4.0 with which i am very happy.
today i tried to DD the partition just to save it. I boot from another ide hdd where i have version 3.6 and run(the sda1 disk was not mounted)
dd if=/dev/sda1 of=/home/conan/save/zaloha.file
but after one hour it stopped with info that i do not have more space to save.
so i boot again from sata disk the 4.0 version and run
dd if=/dev/sda1 of=/dev/null
370233927+0 records in
370233927+0 records out
189559770624 bytes transferred in 3332.174483 seconds (56887708 bytes/sec)
my question is, why it record so much giga, when my disk is full only from 5% - 8GB
i hope it is not because, i have created by mistake a swap disk 10gb instead of 1gb.
thankx for advice![]()
ORICO Multi Bay RAID Hard Drive Enclosure USB 3.0/ Type-C For 2.5/3.5'' HDD SSDs
$239.99
Dell EMC 092GD6 Broadcom 9305-16i LSI Quad Port 4 Port SAS RAID Controller
$84.99
OWC Guardian Maximus Raid Enclosure SATA Hard Drive FireWire
$36.99
Dell PERC H330 PCIe 3.0 x8 RAID Storage Controller 4Y5H1 High Profile
$15.99
LSI MegaRAID 9361-8i 12Gbps PCIe 3 x8 SATA SAS 3 8 Port RAID + BBU & CacheVault
$39.00
9207-8i PCIE3.0 6Gbps HBA LSI FW:P20 IT Mode ZFS FreeNAS unRAID 2* SFF-8087 US
$32.88
Inspur LSI YZCA-00424-101 Raid Card 12Gbps HBA Controller Low Profile 9300-8i IT
$15.98
ACASIS 2.5/3.5 inch 2 Bay SATA USB 3.0 Hard Drive Disk HDD SSD Enclosure 4 RAID
$55.45
36TB SanDisk G-RAID 2 Thunderbolt 3 External Hard Drive - Excellent Condition
$700.00
Yottamaster 2 Bay RAID Hard Drive Enclosure USB 3.1 For 2.5" SATA HDD SSD UASP
$56.25