hi all
A week ago i just got a new sata disk, so i have installed version 4.0 with which i am very happy.
today i tried to DD the partition just to save it. I boot from another ide hdd where i have version 3.6 and run(the sda1 disk was not mounted)
dd if=/dev/sda1 of=/home/conan/save/zaloha.file
but after one hour it stopped with info that i do not have more space to save.
so i boot again from sata disk the 4.0 version and run
dd if=/dev/sda1 of=/dev/null
370233927+0 records in
370233927+0 records out
189559770624 bytes transferred in 3332.174483 seconds (56887708 bytes/sec)
my question is, why it record so much giga, when my disk is full only from 5% - 8GB
i hope it is not because, i have created by mistake a swap disk 10gb instead of 1gb.
thankx for advice
DELL M630 BLADE SERVER x2 XEON E5-2660V3 @ 2.6GH H730 PERC HDD CADDIES 16GB FC
$50.00
Cisco UCS 5108 Blade Server Chassis Enclosure N20-C6508 4x PSU 8x Fans 2x Fabric
$139.99
Dell PowerEdge FX2s CTO Blade 4 Slot 2U Chassis 2x 2000W
$399.00
Dell PowerEdge M630 Blade Server 1x Xeon E5-2630 v4 CPU / Motherboard P/N 0R10KG
$69.99
2 x HP ProLiant BL460c (447707-B21) Blade Servers No RAM No HDD
$30.00
Dell PowerEdge M620 0F9HJC Blade Server 2*E5-2670 2.60GHz 192GB RAM 2*300GB SAS
$103.99
HP ProLiant BL460C G7 Blade Server 2x Intel Xeon 3.06Ghz X5667 QLogic QMH2462
$28.95
Dell PowerEdge M620 Blade Server 2x E5-2670 2.6Ghz 16-Cores 256gb 2x 146gb 15k
$244.99
Dell Poweredge M630 Blade Server 2x E5-2680 v3 2.5ghz 24-Cores / 256gb / H730
$399.99