hi all
A week ago i just got a new sata disk, so i have installed version 4.0 with which i am very happy.
today i tried to DD the partition just to save it. I boot from another ide hdd where i have version 3.6 and run(the sda1 disk was not mounted)
dd if=/dev/sda1 of=/home/conan/save/zaloha.file
but after one hour it stopped with info that i do not have more space to save.
so i boot again from sata disk the 4.0 version and run
dd if=/dev/sda1 of=/dev/null
370233927+0 records in
370233927+0 records out
189559770624 bytes transferred in 3332.174483 seconds (56887708 bytes/sec)
my question is, why it record so much giga, when my disk is full only from 5% - 8GB
i hope it is not because, i have created by mistake a swap disk 10gb instead of 1gb.
thankx for advice
HITACHI HUS724040ALA640 4TB 7200RPM 64MB SATA 6.0Gb/s 3.5" HARD DRIVE ZERO HOURS
$52.00
SAS - HGST Ultrastar 7K4000 HUS724040ALA640 0F14688 3.5" 4TB 7.2K RPM 64MB HDD
$19.99
Hitachi 4TB 3.5" Hard Drive HUS724040ALE640 Ultrastar 7K4000 Internal 7.2K
$49.95
Seagate ST1000VM002 1TB 64MB SATA6Gb/s 3.5" (Low Power) Hard Drive -PC, CCTV DVR
$24.99
HGST Ultrastar DC HC520 12TB SATA 6Gb 256MB 3.5" Enterprise HDD- HUH721212ALE601
$74.99
Seagate ST12000NM0127 12TB SATA 6Gb/s 256MB 7200RPM 3.5" Enterprise Hard Drive
$99.99
1TB HDD/SSD 2.5" SATA Hard Drive with Windows 10 or Windows 11 Pro Installed
$18.99
Seagate Exos X20 18TB SATA 6Gb/s 3.5" Enterprise Hard Drive - ST18000NM003D
$168.00
Western Digital DC HC320 Ultrastar 8TB 7200RPM SATA HD, HUS728T8TALE6L4, 0B36404
$99.00
WD 4TB Gold Enterprise - 7200 RPM SATA 6Gb/s 128MB CACHE 3.5" HDD - WD4002FYYZ
$42.95