hi all
A week ago i just got a new sata disk, so i have installed version 4.0 with which i am very happy.
today i tried to DD the partition just to save it. I boot from another ide hdd where i have version 3.6 and run(the sda1 disk was not mounted)
dd if=/dev/sda1 of=/home/conan/save/zaloha.file
but after one hour it stopped with info that i do not have more space to save.
so i boot again from sata disk the 4.0 version and run
dd if=/dev/sda1 of=/dev/null
370233927+0 records in
370233927+0 records out
189559770624 bytes transferred in 3332.174483 seconds (56887708 bytes/sec)
my question is, why it record so much giga, when my disk is full only from 5% - 8GB
i hope it is not because, i have created by mistake a swap disk 10gb instead of 1gb.
thankx for advice
Cisco UCS LSI MegaRAID 9271CV-8I SAS2308 PCIe SAS Internal RAID Controller
$28.00
ACASIS 2.5/3.5 inch 2 Bay SATA USB 3.0 Hard Drive Disk HDD SSD Enclosure 4 RAID
$58.99
Intel PCIe SSD AIC RAID Controller Card G97168-252
$44.55
LSI 9305-16i SATA SAS 12Gbs RAID Controller PCIe 3.0 x8 IT-Mode 4* 8643 SATA
$229.99
Inspur LSI 9300-8i Raid Card 12Gbps HBA HDD Controller High Profile IT MODE
$15.98
LSI MegaRAID 9361-8i 12Gb PCIe 8-Port SAS/SATA RAID 1Gb w/BBU/CacheVault/License
$39.95
LSI MegaRaid 9361-8i 12Gbps SAS / SATA Raid Controller PCIe x8 3.0 Tested
$29.00
ORICO Multi Bay RAID Hard Drive Enclosure USB 3.0/ Type-C For 2.5/3.5'' HDD SSDs
$87.99
4 Bay RAID External Hard Drive Enclosure for 2.5/3.5" SATA HDD/SSD
$79.99
G TECHNOLOGY G RAID 0G04228 2-Bay Thunderbolt 2 RAID Array W/Power Supply
$99.99