Yes, from my experience you need at least a PIII running at 900Mhz.Should I try a faster processor? 800Mhz? 900Mhz?
I am fixing up an old 700 Mhz PC with Knoppix 3.9 for the daughter of a friend of mine and I want to get the system to play DVDs.
I installed Xine which worked OK but was very 'jerky' (dropping frames) and so I tried Totem which was much smoother but still a little bit jerky.
My question is ...
In order to get the playback completely smooth what should I upgrade?
Should I put in more RAM? (I experiemented with 384 Mb and it was still jerky)
Should I try a faster processor? 800Mhz? 900Mhz?
Or is the problem with the graphic card? (it's an ELSA trio 64V2/DX, PCI)
Or should I forget the whole thing and just get a much faster PC?
If anyone can point me towards the best 'adjustment' to make or can give me tuning tips, then that would be a great help.
Many thanks,
Alan Searle.
Yes, from my experience you need at least a PIII running at 900Mhz.Should I try a faster processor? 800Mhz? 900Mhz?
NEW Sealed Cisco SFP-10G-LR 10GBASE-LR SFP+ 1310nm 10km *US Shipping*
$18.00
New HP HPE Aruba J4858D 1G SFP LC SX 850nm 500m MMF XCVR Transceiver Module
$28.49
New Cisco SFP-25G-SR-S 25G SFP28 25GBASE-SR 850nm 300m LC MMF Transceiver Module
$51.30
New Precision DWDM SFP+ 10G 80km Tunable Transceiver 50GHz C-Temp DWDM-SFP10G-C
$90.00
GENUINE Cisco SFP-10G-SR V03 SFP+ GBIC Transceiver Module 10-2415-03
$6.80
🔥🔥🔥 CISCO SFP-10G-SR V03 10-2415-03 850nm 10GBASE-SR SFP+ Multi Module 🔥🔥🔥
$6.80
For Cisco SFP-10G-T, Ubiquiti UF-RJ45-10G Transceiver, SFP+ to RJ45 10GBase-T
$45.99
Cisco GLC-LH-SMD Transceiver Module SFP 10-2625-01
$14.25
Dell X1018 X-Series Smart Managed Switches 16-Port Gigabit 2-Port SFP Switch
$42.00
LOT OF 10 455883-B21 HP 10Gb SR SFP Transceiver 455885-001 456096-001
$59.99