OK The PPP Setup won't detect a network card and asks me to specify drivers, and LiSa doesn't find anything either, and asks for me to give the IP address of the device.
Can't get any network or internet.. running ASAS/TeK Broadcom 440x 10/100 integrated, and a netgear router ( don't recommend them). I'm a linux noob... i hope it's an easy fix
Thanks all,
.S-nic
OK The PPP Setup won't detect a network card and asks me to specify drivers, and LiSa doesn't find anything either, and asks for me to give the IP address of the device.
IIRC this NIC chip is not supported or not supported very well in linux.Broadcom 440x
rock
Sorry, you're wrong..Originally Posted by RockMumbles
This chip works *perfectly* under Linux (under Linux Mandrake, for example), it only takes the source module (GPL'd) to be included in Knoppix.
Rather than reveling in the fact that Rock wasn't spot on for once you could do everyone with a Broadcom integrated NIC a favor by letting the developers know via the mailing list here:Originally Posted by Anonymous
http://www.knoppix.net/docs/index.php/MailingList
I wasn't aware of this mailing list.. anyway I let the whole Knoppix community know this matter some day ago (see my thread "Broadcom NIC module not included" on Hardware forum).Originally Posted by rickenbacherus
Posting here is also a possibility. I suspect it's more likely to be seen by the developers (who do not read every single one of the tons of posts show up on this forum). But the mailing list is perhaps the best idea since this might not technically be considered a bug.
If anyone has a working ISO of Knoppix that recognizes broadcom nic's please let us know. It works fine on a desktop box with a 10/100 standard nic but not on my laptop with broadcom.
I also found another NIC that it won't support. an OvisLink ISA 10 Megabit network card.. may have to try my linksys...
The aforementioned OvisLink card is recognized by Win 98 and WinLinux 2000, though..
To the above stated problem grab the drivers right here and enjoy
http://xaravve.trentu.ca/adam/5100/
his download is redcrap ( I mean hat ) but my experience it works just fine \
SUN Blade X6250 Server 8GB RAM DUAL PROCESSORS 594-4531-01
$109.99
Dell PowerEdge FX2 FX2S Enclosure - 4x PowerEdge FC640 w/ 8x Gold 6132 112C 1TB
$2699.99
HPE BL460c G10 ProLiant Blade | 2x Silver 4110 | 16GB | P204I | 2x300GB 10KRPM
$1419.00
Dell PowerEdge M620 0F9HJC Blade Server 2*E5-2670 2.60GHz 192GB RAM 2*300GB SAS
$103.99
Dell PowerEdge M640 Blade Server 2x Xeon Gold 5122 3.6GHz, No RAM, READ _
$402.38
HP ProLiant BL460c G9 (Gen9) 2x E5-2670V3 12 Core 3.1GHz No Ram or No Drives
$59.98
HPE 863442-B21 ProLiant BL460c G10 Blade (2) Intel Xeon Silver CPUs NO HD/NO RAM
$319.00
HPE ProLiant BL460c Gen9 16-Core Blade 779803-S01 (2)CPU on board No RAM/No HDD
$89.00
Cisco UCS 5108 Blade Server Chassis Enclosure N20-C6508 4x PSU 8x Fans 2x Fabric
$139.99
Dell PowerEdge FX2s CTO Blade 4 Slot 2U Chassis 2x 2000W
$399.00