Go to the root shell and type "ifconfig" and "iwconfig" and paste result here. And shut down wep encryption and then try again. Maybe is something wrong with wep. Just for troubleshoting.
Ive got a really strange problem. Well, maybe its not strange, i dont know, im still extremely new to linux. Im trying to setup my wifi card, its a d-link Airplus G, and after i use netcardsetup,and enter my WEP stuff, KWifi shows i have a connection to my defult with an excellent connection. My problem is when i use any internet application (konquror, firefox,etc) it cant find any websites. Im using the 4.0.1 live DVD by the way, and there are no proxies i use. Please help me if you can, and walk me through with baby steps, as i just started using knoppix and linux this past week.
Go to the root shell and type "ifconfig" and "iwconfig" and paste result here. And shut down wep encryption and then try again. Maybe is something wrong with wep. Just for troubleshoting.
After you have input the wlan-stuf you need to configure the card as a normal network-card. There you can choose to use dhcp (easiest) or input the needed adresses. Your card needs to know where to find the nameserver.
Hi There, I'm having the exactly problem described.I'm new to Linux as well.Kwifimanager sees the wifi card,DHCP is not working, I tried to config the IP address manually, as well as the DNS server, it seems that the system took the configuration, however no ip connectivity.
root@0[network]# iwconfig
lo no wireless extensions.
eth0 IEEE 802.11-DS ESSID:"home123"
Mode:Managed Frequency:2.442 GHz Access Point: 00:06:25D:093
Bit Rate:11 Mb/s Tx-Power=20 dBm Sensitivity=0/65535
Retry limit:16 RTS thrff Fragment thrff
Encryption keyff
Power Managementff
Link Quality=100/100 Signal level=-35 dBm Noise level=-102 dBm
Rx invalid nwid:52 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:3802 Missed beacon:0
wifi0 IEEE 802.11-DS ESSID:"home123"
Mode:Managed Frequency:2.442 GHz Access Point: 00:06:25D:093
Bit Rate:11 Mb/s Tx-Power=20 dBm Sensitivity=0/65535
Retry limit:16 RTS thrff Fragment thrff
Encryption keyff
Power Managementff
Link Quality=100/100 Signal level=-35 dBm Noise level=-102 dBm
Rx invalid nwid:52 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:3802 Missed beacon:0
eth1 no wireless extensions.
sit0 no wireless extensions.
root@0[network]# ifconfig eth0
eth0 Link encap:Ethernet HWaddr 000:59:BC:0C:AD
inet addr:192.168.1.31 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::2d0:59ff:febc:cad/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:39 errors:1342 dropped:0 overruns:0 frame:1342
TX packets:358 errors:25 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:9208 (8.9 KiB) TX bytes:18158 (17.7 KiB)
Interrupt:11 Base address:0x8000
can you guys shed some lights on it?
Thanks.
Eric
Supermicro Server Tower Xeon BOOTS E5-2620 v4 2.10GHz 64GB RAM NO HDD NO OS
$199.99
HPE Proliant Microserver Gen10 X3421 Perf AMS, P03698-S01, 16GB Ram
$299.00
HP ProLiant Xeon E3-1220L V2 16 GB RAM 2.30 GHz MicroServer Gen8 NO DRIVES
$174.99
HPE PROLIANT MICROSERVER GEN10 PLUS MICRO TOWER SERVER - USED
$550.00
HP ProLiant HSTNS-5151 Micro Server 8GB RAM No Drives/Key/Caddies *READ*
$94.99
SuperMicro Server 505-2 Intel Atom 2.4GHz 8GB RAM SYS-5018A-FTN4 1U Rackmount
$202.49
HPE ProLiant MicroServer Gen 10 AMD Opteron X3421, 8GB
$216.96
SuperMicro DATTO S3P4000 Server Xeon D-5141 2.4GHz 48GB RAM 2x 4TB SATA HDD
$279.98
2U 12 Bay SAS3 SuperMicro Server 6028U-TR4T+ W/ X10DRU-i+ Barebone 12 Caddy RAIL
$299.00
1U Supermicro Server 10 Bay 2x Intel Xeon 3.3Ghz 8C 128GB RAM 480GB SSD 2x 10GBE
$297.00