Go to the root shell and type "ifconfig" and "iwconfig" and paste result here. And shut down wep encryption and then try again. Maybe is something wrong with wep. Just for troubleshoting.
Ive got a really strange problem. Well, maybe its not strange, i dont know, im still extremely new to linux. Im trying to setup my wifi card, its a d-link Airplus G, and after i use netcardsetup,and enter my WEP stuff, KWifi shows i have a connection to my defult with an excellent connection. My problem is when i use any internet application (konquror, firefox,etc) it cant find any websites. Im using the 4.0.1 live DVD by the way, and there are no proxies i use. Please help me if you can, and walk me through with baby steps, as i just started using knoppix and linux this past week.
Go to the root shell and type "ifconfig" and "iwconfig" and paste result here. And shut down wep encryption and then try again. Maybe is something wrong with wep. Just for troubleshoting.
After you have input the wlan-stuf you need to configure the card as a normal network-card. There you can choose to use dhcp (easiest) or input the needed adresses. Your card needs to know where to find the nameserver.
Hi There, I'm having the exactly problem described.I'm new to Linux as well.Kwifimanager sees the wifi card,DHCP is not working, I tried to config the IP address manually, as well as the DNS server, it seems that the system took the configuration, however no ip connectivity.
root@0[network]# iwconfig
lo no wireless extensions.
eth0 IEEE 802.11-DS ESSID:"home123"
Mode:Managed Frequency:2.442 GHz Access Point: 00:06:25D:093
Bit Rate:11 Mb/s Tx-Power=20 dBm Sensitivity=0/65535
Retry limit:16 RTS thrff Fragment thrff
Encryption keyff
Power Managementff
Link Quality=100/100 Signal level=-35 dBm Noise level=-102 dBm
Rx invalid nwid:52 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:3802 Missed beacon:0
wifi0 IEEE 802.11-DS ESSID:"home123"
Mode:Managed Frequency:2.442 GHz Access Point: 00:06:25D:093
Bit Rate:11 Mb/s Tx-Power=20 dBm Sensitivity=0/65535
Retry limit:16 RTS thrff Fragment thrff
Encryption keyff
Power Managementff
Link Quality=100/100 Signal level=-35 dBm Noise level=-102 dBm
Rx invalid nwid:52 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:3802 Missed beacon:0
eth1 no wireless extensions.
sit0 no wireless extensions.
root@0[network]# ifconfig eth0
eth0 Link encap:Ethernet HWaddr 000:59:BC:0C:AD
inet addr:192.168.1.31 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::2d0:59ff:febc:cad/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:39 errors:1342 dropped:0 overruns:0 frame:1342
TX packets:358 errors:25 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:9208 (8.9 KiB) TX bytes:18158 (17.7 KiB)
Interrupt:11 Base address:0x8000
can you guys shed some lights on it?
Thanks.
Eric
Juniper Networks EX3300-48P 48-Port PoE+ 4x SFP+ Network Switch w/ Power Cord
$43.95
lot of 10 Juniper EX-SFP-10GE-SR Compatible 10GBASE-SR SFP+ 850nm 300m DOM -J499
$220.00
JUNIPER EX3400-48P 48x 1GB PoE+ RJ-45 4x 10GB SFP+ 2x 40GB QSFP+, DUAL AC POWER
$210.00
Juniper Networks EX2200-C-12P-2G 12 Port Gigabit PoE 2 T/SFP 1G Network Switch
$129.00
Juniper EX3300-48P, 48 Port PoE+ Gigabit Network Switch w/ Power cord
$54.99
EX2300-24P Juniper 24-port 10/100/1000BASE-T PoE+ 4 x 1/10GbE SFP/SFP+ UNCLAIMED
$450.00
Juniper Networks EX3300 EX3300-48P 48-Port Gigabit PoE+ Switch
$41.43
Juniper EX3400-48P 48-Ports PoE+ 4x SFP+ and 2x QSFP+ Managed Switch Tested
$205.00
Juniper QFX5100-48T-AFI 48 100M/1G/10G Base-T 6 QSFP AFI
$485.00
JUNIPER EX4550-32F-AFO 32-PORT ETHERNET SWITCH 2x POWER SUPPLY - TESTED
$299.99