hi
I am new to Knoppix but not linux. I can start Knoppix on my PC with the CD or DVD fine.
I use "K->KNOPPIX->Configure->Create a persistent KNOPPIX disk image" to
create a disk image (100MB) on my /dev/sda7 (empy 37G partition ext2 formated),
I can see the knoppix.img created. If I make some change (wall paper, 'touch ~/foo')
then reboot with "knoppix home=/dev/sda7" or "knoppix home=scan" I don't
see my changes re-appear. (nor do I see the blue screen with multiple choice box
that lets me select "system" during start up) why? I assume the disk image I created wasn't used.
To be sure I made the changes again and created a new image after the changes then reboot
again. I still don't see the changes. Then I tried to make the image on a USB
stick. It *works* with "knoppix home=scan" but *not* with "knoppix home=/dev/sdb1".
Why?
How do I check if the disk image is used? and if the image is not being used, what is wrong?
by the way I can use K->KNOPPIX->Configure->Save KNOPPIX Configuration to to save
config changes on a USB stick. From what I understood, this and the disk image are two separate
things. no?
can anyone tell me what the problem is? thanks
$599.99
Dell R730 w/ 2x E5-2650v3 10c, 192GB (12x16GB) RAM, H730 Mini, 2x 750W PSU
$349.99
Dell PowerEdge R720 Server - 2x8c CPU,256Gb RAM, 128Gb SSD/3x900Gb SAS, Proxmox
$340.00
$169.99
Dell PowerEdge R620 Server 2x E5-2660 v1 2.2GHz 16 Cores 256GB RAM 2x 300GB HDD
$79.19
Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 128GB RAM No HDD
$389.99
Dell PowerEdge R720XD Xeon E5-2680 V2 2.8GHz 20 Cores 256GB RAM 12x4TB
$510.00
HP ProLiant DL360 G9 2x Xeon E5-2690 V3 24 Cores 2.6GHz P440ar 32GB DDR4
$105.59
DELL PowerEdge R730 Server 2x E5-2690v3 2.6GHz =24 Cores 32GB H730 4xRJ45
$274.00
1U Supermicro Server 10 Bay 2x Intel Xeon 3.3Ghz 8C 128GB RAM 480GB SSD 2x 10GBE
$297.00