Dear All,
Hopefully someone wll point me at a simple faq which I have overlooked but....
I installed knoppix to my laptop with a pccard network card in place. Everything worked fine.
I then wanted to slot in a wifi card as well & discovered that I couldn't due to space contrants (the wired netcard is too big). Never mind I have a netcard with one of those external adaptors which fits. Now both Wifi & wired netcard fit. Hurray. However .....now I only have localhost (i.e. no more eth0). I know the netcard is a bog standard clone card & works well with mandrake & Suse & it's happily reported by lspci.
So is there a faq? An auto config script I can run? right now a basic dhcp setup will do.
TIA
Adam
OWC Guardian Maximus Raid Enclosure SATA Hard Drive FireWire
$36.99
Dell EMC 092GD6 Broadcom 9305-16i LSI Quad Port 4 Port SAS RAID Controller
$84.99
Yottamaster 2 Bay RAID Hard Drive Enclosure USB 3.1 For 2.5" SATA HDD SSD UASP
$56.25
Yottamaster 5 Bay RAID Hard Drive Enclosure Type-C B For 2.5" 3.5" SATA HDD SSDs
$131.59
Dell PERC H330 PCIe 3.0 x8 RAID Storage Controller 4Y5H1 High Profile
$17.99
LSI MegaRAID 93614I Raid Controller Card
$37.99
LSI MegaRAID 9361-8i 12Gbps PCIe 3 x8 SATA SAS 3 8 Port RAID + BBU & CacheVault
$39.00
LSI 8 Port 6Gbps PCIe 3.0 External SAS RAID Card w/ 1GB CacheVault & Low Profile
$29.00
Yottamaster 2 Bay RAID Hard Drive Enclosure USB 3.1 Type B For 3.5" SATA HDDs
$69.91
ACASIS 2.5/3.5 inch 2 Bay SATA USB 3.0 Hard Drive Disk HDD SSD Enclosure 4 RAID
$54.66