Dear All,
Hopefully someone wll point me at a simple faq which I have overlooked but....
I installed knoppix to my laptop with a pccard network card in place. Everything worked fine.
I then wanted to slot in a wifi card as well & discovered that I couldn't due to space contrants (the wired netcard is too big). Never mind I have a netcard with one of those external adaptors which fits. Now both Wifi & wired netcard fit. Hurray. However .....now I only have localhost (i.e. no more eth0). I know the netcard is a bog standard clone card & works well with mandrake & Suse & it's happily reported by lspci.
So is there a faq? An auto config script I can run? right now a basic dhcp setup will do.
TIA
Adam
HP ProLiant BL460c Gen9 Blade Server 1x Xeon E5-2623 v3 3.00GHz 16GB DDR4 No HDD
$169.99
HP ProLiant BL460c Gen9 Blade 2x E5-2690v4 2.6GHz =28 Cores 32GB P246 650FLB
$223.00
DELL PowerEdge M630 Blade 2x E5-2680v4 2.4GHz =28 Cores 128GB H330 2x10Gb X520
$275.00
Dell PowerEdge FX2s CTO Blade 4 Slot 2U Chassis 2x 2000W
$399.00
HP ProLiant BL460c Gen9 Blade Server Intel Xeon E5-2698 v3 - 512GB RAM
$255.61
Dell PowerEdge M620 Blade Server 2x 10C E5-2690v2 64GB Ram 2x 600GB 10k HDD
$125.00
Sun Microsystems Blade 100 Workstation UltraSPARC-IIe 500MHz 256MB Server No HDD
$95.00
Google Search Appliance - Dell PowerEdge R710 x2 Xeon X5690 192GB Memory 6TB HDD
$529.99
DELL PEM640 POWEREDGE M640 BLADE SERVER
$539.95
DELL POWEREDGE M630 BLADE 2x 12 CORE E5-2690 v3 2.6GHz 24X16GB 384GB RAM NO HDD
$399.00