Hey guys,
The problem I was having was related to bug #15 on the following:
http://www.knoppix.net/wiki/Bugs/3.9-2005-05-27
If I do: "ifconfig lo 127.0.0.1" all is good.
Hello All,
I'm running 3.9 and I'm trying to utilze ssh tunneling and I keep getting the following error:
bind: Cannot assign requested address
channel_setup_fwd_listener: cannot listen to port: 10080
Could not request local forwarding.
-----------------------------------------------------------
In fact, I can't even ping localhost...here's what I gut when I enter "ping localhost"
PING mymachine (127.0.0.1): 56 data bytes
--- dasun ping statistics ---
104 packets transmitted, 0 packets received, 100% packet loss
-----------------------------------------------------------
Is there a security setting (e.g., one of the /etc files) that I need to change before I can get this to work?
Btw, this worked fine when I was running Knoppix 3.8
Thanks!
blahzik.
Hey guys,
The problem I was having was related to bug #15 on the following:
http://www.knoppix.net/wiki/Bugs/3.9-2005-05-27
If I do: "ifconfig lo 127.0.0.1" all is good.
Supermicro 4U 36 Bay Storage Server 2.4Ghz 8-C 128GB 1x1280W Rails TrueNAS ZFS
$712.98
HP ProLiant DL360 G9 Server | 2 x E5-2660V3 2.6Ghz | 64GB | 2 x 900GB SAS HDD
$339.00
Dell Poweredge R640 Server | 2x Xeon Gold 6132 | 128GB | H730P | 8x HDD Trays
$1849.00
Dell PowerEdge R7525 Server 24X2.5(8XNVME)+H745 2xEPYC 7302 CPU 128G RAM 2x2400W
$3350.00
Dell PowerEdge R620 Server 2x E5-2660 v1 2.2GHz 16 Cores 256GB RAM 2x 300GB HDD
$89.99
Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 128GB RAM No HDD
$389.99
Dell PowerEdge R720 Server - 2x8c CPU,256Gb RAM, 128Gb SSD/3x900Gb SAS, Proxmox
$340.00
HP Proliant DL360 Gen9 28 Core SFF Server 2X E5-2680 V4 16GB RAM P440ar No HDD
$196.95
1U Supermicro Server 10 Bay 2x Intel Xeon 3.3Ghz 8C 128GB RAM 480GB SSD 2x 10GBE
$297.00
Dell PowerEdge R620 Server 2x E5-2650 V2 = 16 Cores H710P 128GB RAM 2x 600GB SAS
$274.99