-
pump to get hostname
Hi Everyone
Has anybody had any experience using pump to find out and set the "proper" hostname of a box, based on a DNS server? I am trying to get this to start on boot and its not clear to me if this is even possible. If it isn't, could anybody suggest how to switch to using dhcpc instead to achieve the same?
Thanks in advance
Ben
-
Hi again
In the end I determined that pump could not do this, so I added the line
Code:
hostname $(dig -x `ifconfig $DEVICE | grep "inet addr" |awk '{print $2}' | cut -d : -f2` +short |cut -d . -f1)
to /etc/init.d/knoppix-auoconfig, after netdevice detection has finished. I set $DEVICE to eth0, but in the more general case I think leaving out $DEVICE should work. If a network was unavailble I think that the command would fail, and the hostname would remain Knoppix (as set earlier in the script)
Ben
Similar Threads
-
By paradigm_shift in forum Networking
Replies: 0
Last Post: 07-15-2005, 05:36 AM
-
By probono in forum Networking
Replies: 0
Last Post: 09-17-2004, 04:52 AM
-
By qman_txun in forum Networking
Replies: 4
Last Post: 11-04-2003, 08:22 AM
-
By JockVSJock in forum Networking
Replies: 7
Last Post: 10-08-2003, 09:23 AM
-
By probono in forum Networking
Replies: 0
Last Post: 06-08-2003, 11:42 PM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
![DELL PowerEdge R730XD Server 2x E5-2680v3 2.5GHz =24 Cores 32GB H730 4xRJ45 picture](/store/img/g/psQAAOSwaY9ki5PI/s-l225/DELL-PowerEdge-R730XD-Server-2x-E5-2680v3-2-5GHz-2.jpg)
DELL PowerEdge R730XD Server 2x E5-2680v3 2.5GHz =24 Cores 32GB H730 4xRJ45
$271.00
![Dell PowerEdge R730 2x E5-2699V3 2.3Ghz 36 Core 128GB RAM H730 X520-I350 2x750W picture](/store/img/g/W38AAOSwtcVjVC0Z/s-l225/Dell-PowerEdge-R730-2x-E5-2699V3-2-3Ghz-36-Core-12.jpg)
Dell PowerEdge R730 2x E5-2699V3 2.3Ghz 36 Core 128GB RAM H730 X520-I350 2x750W
$329.99
![Dell Poweredge R630 Server 2x E5-2620 V4 =16 Cores | S130 | 32GB RAM | 2x trays picture](/store/img/g/GAcAAOSw9Q1mGSZW/s-l225/Dell-Poweredge-R630-Server-2x-E5-2620-V4-16-Cores-.jpg)
Dell Poweredge R630 Server 2x E5-2620 V4 =16 Cores | S130 | 32GB RAM | 2x trays
$159.99
![DELL R630 SERVER 8 x 2.5'' 2X E5-2680V4 32GB RAM IDRAC ENT & NDC 2X 495W PSU picture](/store/img/g/mkkAAOSwE5ZmT1Cg/s-l225/DELL-R630-SERVER-8-x-2-5-2X-E5-2680V4-32GB-RAM-IDR.jpg)
DELL R630 SERVER 8 x 2.5'' 2X E5-2680V4 32GB RAM IDRAC ENT & NDC 2X 495W PSU
$174.95
![Dell PowerEdge R630 Server 2x E5-2640v3 2.60Ghz 16-Core 64GB H330 picture](/store/img/g/ZD0AAOSwm41mOZYw/s-l225/Dell-PowerEdge-R630-Server-2x-E5-2640v3-2-60Ghz-16.jpg)
Dell PowerEdge R630 Server 2x E5-2640v3 2.60Ghz 16-Core 64GB H330
$182.65
![Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 128GB RAM No HDD picture](/store/img/g/QTAAAOSwrO9l4PEx/s-l225/Dell-PowerEdge-R730XD-28-Core-Server-2X-Xeon-E5-26.jpg)
Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 128GB RAM No HDD
$389.99
![Dell PowerEdge R720xd 26HDD 300gb 2.5-inch E5-2697 X 2CPU 384RAM 7.2 Tb HDD  picture](/store/img/g/yAwAAOSwdyNlgQ8d/s-l225/Dell-PowerEdge-R720xd-26HDD-300gb-2-5-inch-E5-2697.jpg)
Dell PowerEdge R720xd 26HDD 300gb 2.5-inch E5-2697 X 2CPU 384RAM 7.2 Tb HDD 
$180.00
![Dell PowerEdge R620 Server - 256GB RAM, 2x8cCPU, 120Gb SSD/3x900Gb SAS, Proxmox picture](/store/img/g/480AAOSw9TVl9vAv/s-l225/Dell-PowerEdge-R620-Server-256GB-RAM-2x8cCPU-120Gb.jpg)
Dell PowerEdge R620 Server - 256GB RAM, 2x8cCPU, 120Gb SSD/3x900Gb SAS, Proxmox
$320.00
![DELL PowerEdge R430 8SFF 2x E5-2680v4 2.4GHz =28 Cores 32GB H730 4xRJ45 picture](/store/img/g/1hMAAOSw8hVl8bKq/s-l225/DELL-PowerEdge-R430-8SFF-2x-E5-2680v4-2-4GHz-28-Co.jpg)
DELL PowerEdge R430 8SFF 2x E5-2680v4 2.4GHz =28 Cores 32GB H730 4xRJ45
$230.00
![Dell Poweredge R630 2x Xeon E5-2680 v4 2.4ghz 28-Cores / 128gb / H330 / 2x 1TB picture](/store/img/g/7XkAAOSwnhFkFNvU/s-l225/Dell-Poweredge-R630-2x-Xeon-E5-2680-v4-2-4ghz-28-C.jpg)
Dell Poweredge R630 2x Xeon E5-2680 v4 2.4ghz 28-Cores / 128gb / H330 / 2x 1TB
$334.99