Hi,
my knoppix works fine on my AMILO A-1640, but there are some things that can work better.
Linux is based on many, many different config-files, and many faqs talk about "put something in to your config-file", never mentioning in which config-file or where this config-file is located.
I have three network-cards with my wlan plugged in and tow network-cards without it.
The first (eth0) seems to be the firewire-interface or the wlan-card of the notebook which is not plugged in. No problem with this.
When the Netgear-card is not plugged in then my CAT5-card gets eth1, it looks via DHCP and gets all needed info by my router.
When the Netgear-Card is plugged in (before boot) it gets eth1, but because the wlan-configs (WEP etc.) are not set it does not get an IP and so on. The CAT5-Card is eth2 then.
How can i tell knoppix to put the CAT5-card to eth2 or put the WLAN-card to eth2, disregarding if wlan is plugged or not?
I need to activate my wlan-card via the two utilities in the knoppix-menue, first the wlan-parameters (need to press 8 times RETURN after typing in root-password) and then configure eth1 to look for a DHCP-server.
Where do i need to put some lines in to tell linux to do this automatically?
Thanks a lot
Hartmut
Dell PowerEdge R720 Server - 2x8c CPU,256Gb RAM, 128Gb SSD/3x900Gb SAS, Proxmox
$340.00
Supermicro 4U 36 Bay Storage Server 2.4Ghz 8-C 128GB 1x1280W Rails TrueNAS ZFS
$712.98
EXAGRID EX32000E Server Intel Xeon E5620 @ 2.40GHz 16GB RAM 16x 2TB HDD
$679.00
$209.99
HP Proliant DL360 Gen9 28 Core SFF Server 2X E5-2680 V4 16GB RAM P440ar No HDD
$196.95
Dell PowerEdge R720XD Xeon E5-2680 V2 2.8GHz 20 Cores 256GB RAM 12x4TB
$510.00
DELL PowerEdge R730 Server 2x E5-2690v3 2.6GHz =24 Cores 32GB H730 4xRJ45
$274.00
Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 128GB RAM No HDD
$389.99
DELL PowerEdge R730 Server 2x E5-2680v4 2.4GHz =28 Cores 32GB H730 4xRJ45
$284.00
HP ProLiant DL380 Gen9 16SFF 2x E5-2680v4 2.4GHz =28 Cores 64GB P840 4xRJ45
$353.00