3.9 is well known tohave some USB issues.
I was useing 3.6 I just installed 3.9 and now my DVD burner is gone?
3.9 is well known tohave some USB issues.
---
Verifying of md5 checksum and burning a CD at slow speed are important.
Is 4.0 better?
or is there an upgrade for this?
This seems to be a real issue with Linux.
I'm using the dual-kernel 3.7 version of Knopix.
I noticed that I have full use of my external USB DVD-rw in Knoppix 3.7 (HDD install) using the 2.4 kernel. I can burn CDs, DVDs, play DVDS, etc.
But when I tried to install the same burner using the 2.6.9 kernel the "lsusb" command sees the drive as an "sda" drive. I can mount it and read it but it does not have burning abilities.
(Version 3.7 was the last to use two kernels, BTW.)
Kinda weird. Seems like a later kernel should add MORE hardware support. Not less.
So I continue to use the 2.4 kernel. Frustrating.
sakiZ
I figured out a workaround!
I put my usb dvd burner on the other windosw box and converted all my fav dvd's to mp4 and slapped them on cd's![]()
XGS-PON ONU SFP+ Stick MAC SC/APC 1270/1577nm -40 to 85°C 10G/10G XGSPON ONT
$199.99
Lot of 10 Cisco SFP-10G-SR 10-2415-03 V03 10GBase-SR 850nmSFP+Transceiver Module
$34.95
Cisco SFP-10G-SR SFP Transceiver Module
$13.00
$94.09
🔥🔥🔥Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver 10-2415-03 🔥🔥🔥
$8.00
INTEL 10G SFP+ SR SFP E10GSFPSR FTLX8571D3BCV-IT For X520-DA2 X520-SR2 X710-DA2
$9.49
Cisco SFP-10G-SR 10-2415-03 10 Gigabit Transceiver LOT OF 8
$24.00
FTLX1471D3BCL Finisar 10Gb 10km 1310nm Single Mode Datacom SFP+ Transceiver
$5.99
For Cisco SFP-10G-T, Ubiquiti UF-RJ45-10G Transceiver, SFP+ to RJ45 10GBase-T
$40.99
♻️ Lot of 3 Finisar FTLX8574D3BCL 10G SFP+ SR Transceiver Module ⚡Fast Ship
$14.00