I cannot say if this will work for you or not but you could check out:
Kmenu>System>DSL>DSL Configuration tool
Can't get network working, connecting via network card to external adsl modem/router. I tell to netcardconfig same addresses as in my other os wich works.
dmesg says NETDEV watchdog: eth0: transmit timed out
my networkcard is: PCI Realtek (irq 1
adsl modem: Telewell EA200
im running knoppix livecd ver. 3.2 (18.4.2003)
I cannot say if this will work for you or not but you could check out:
Kmenu>System>DSL>DSL Configuration tool
If you've been running Windows on this computer and have run any of the "security updates" for windows this year, see my posts
in this forum titled Evidence WinXP "security updates" may break Linux and Knoppix using NatSemi DP83815 stopped
working. There are also a pair of commands in these posts that might get you working again.
IBM Power 720 POWER7 00E6516 3.6GHz CPU 64GB RAM Server
$209.98
IBM Power S822 12-Bay Server System Power8 Core 3.42Ghz DVD-Rom Drive 64GB No HD
$399.99
IBM 7944AC1 System x3550 M3 Server 1*Intel Xeon X5650 2.67GHz 4GB SEE NOTES
$27.25
$16000.00
IBM Power S822 8284-22A 12SFF Power8 3.89GHz 6-Core 64GB RAM No Bezel/HDD Server
$319.99
IBM SYSTEM x3200 M2 Server - HDD wiped, No OS
$75.00
IBM Lenovo X3650 M5 2U 8x 2.5” CTO Rack Server – 2x HS, 2x 750W
$199.00
IBM BladeCenter HS21 7995 AC1 Server - 1x Xeon E5440 2GB RAM - NO HDDs
$22.43
IBM System X3500 M4 7383AC1 (E5-2650 v2 2.60GHz - 192GB RAM - M2000 - NO OS/HDD)
$294.92
IBM SYSTEM x3650 M4 Xeon E5-2609 2.40GHZ 16GB DDR3-1066MHZ 2x 550W PSU TESTED
$109.95