Does anyone know where this function is implemented?
I've looked at all the scripts in /etc/init.d/, in the initrd (/linuxrc, /etc/init, etc).. but
cannot locate it anywhere. Specifically, what generates that blue screen
that says:
Knoppix has found an image file. Please
be aware of the potential security risk of such configuration images,
because of scripts that can...
Acknowledge image activation by selecting OK. If you do nothing, the
system will boot normally (without image activation) in 20 seconds
KNOPPIX-CONFIGURATION
x home Mount persistent knoppix-homedirectory
x system Add as persistent, writable system area
x overwrite overwrite/update stored system configuration in image
x init start INIT-bootscripts (network, printer, etc.)
I understand the purpose of the screen and the options, I just cannot
locate where this is all implemented. Can anyone shed some light on this?
ORICO 5 Bay Raid Enclosure USB3.0 SATA External Hard Drive Enclosure Up to 80TB
$115.59
Dell EMC 092GD6 Broadcom 9305-16i LSI Quad Port 4 Port SAS RAID Controller
$84.99
8 Bay Tool Less Tray Hot Swap 2.5" 3.5" SATA Non RAID Ext USB 3.0 Enclosure USED
$145.00
ORICO 5 Bay Raid USB3.0 to SATA External Hard Drive Enclosure for 3.5'' HDD LOT
$134.39
ASUS Hyper M.2 x16 Gen 4 RAID Card- Used Working
$32.95
Dell PERC H330 PCIe 3.0 x8 RAID Storage Controller 4Y5H1 High Profile
$17.99
LSI 8 Port 6Gbps PCIe 3.0 External SAS RAID Card w/ 1GB CacheVault & Low Profile
$29.00
WD TB My Book Duo Desktop RAID External Hard Drive 0TB NO DRIVES
$42.00
OWC Guardian Maximus Raid Enclosure SATA Hard Drive FireWire
$36.99
Yottamaster 5 Bay RAID Hard Drive Enclosure Type-C B For 2.5" 3.5" SATA HDD SSDs
$139.99