Does anyone know where this function is implemented?
I've looked at all the scripts in /etc/init.d/, in the initrd (/linuxrc, /etc/init, etc).. but
cannot locate it anywhere. Specifically, what generates that blue screen
that says:
Knoppix has found an image file. Please
be aware of the potential security risk of such configuration images,
because of scripts that can...
Acknowledge image activation by selecting OK. If you do nothing, the
system will boot normally (without image activation) in 20 seconds
KNOPPIX-CONFIGURATION
x home Mount persistent knoppix-homedirectory
x system Add as persistent, writable system area
x overwrite overwrite/update stored system configuration in image
x init start INIT-bootscripts (network, printer, etc.)
I understand the purpose of the screen and the options, I just cannot
locate where this is all implemented. Can anyone shed some light on this?
$59.99
Seagate Barracuda ST10000DM005 10TB 256MB SATA 6Gb/s 3.5" Internal Hard Drive
$153.99
WD 2TB Certified Refurbished Elements, External Hard Drive - RWDBU6Y0020BBK-WESN
$49.99
WD 1TB Elements SE, Portable External Hard Drive - WDBEPK0010BBK-WESN
$44.99
HGST Ultrastar DC HC520 12TB SATA 6Gb 256MB 3.5" Enterprise HDD- HUH721212ALE601
$79.99
Seagate ST12000NM0127 12TB 256MB 7200RPM 3.5" SATA 6.0Gb/s Enterprise Hard Drive
$93.88
Seagate ST12000NM0127 12TB SATA 6Gb/s 256MB 7200RPM 3.5" Enterprise Hard Drive
$99.99
Seagate Exos 7E10 ST2000NM000B 2TB 7200RPM SATA 6.0Gb/s 3.5" Internal Hard Drive
$29.99
HGST 0F27352 10TB 3.5" SAS 7200 RPM 12Gb/s Hard Drive 100% #73 v
$65.00
Western Digital WD10JUCT 1TB 2.5" SATA 3Gb/s 5400 RPM 16MB Laptop Hard Drive
$17.98